564042

Stiga AUTOCLIP 720 S Manual

95
Zoom out
Zoom in
Previous page
1/788
Next page
37
User’s manual
EN
“SECONDARY AREAS” – PROGRAMMING MODE
If the area to mow requires secondary areas based on the de nition given in the chapter
“Preparation and Marking the Boundaries of the Work Areas” on page 19, then it is
necessary to program the secondary areas so the robot knows how to reach the secondary area
and at what frequency.
SECONDARY AREA 1 : Function for de ning the automatic mowing of a secondary area.
- Percentage: Allows setting the dimensions
of the secondary area to mow in respect to
the entire lawn surface. Below is a table
to use as a reference for con guring a
secondary area:
• 20% Indicates a very small area.
• 30% Indicates an area which is
approximately one third of the entire
garden.
• 50% Indicates an area which is
approximately half of the entire
garden.
• 80% Indicates a secondary area
which is bigger than the primary
area.
• 100% The robot will follow
the perimeter wire to mow the
secondary area each time it exits
the charging station.
primary area
clockwise directionanti-clockwise direction
secondary area 1 (30%)
secondary area 2 (20%)
- Distance: This allows setting the distance necessary for the robot to reach the secondary
area by following the perimeter wire. It is recommended to measure half the distance of the
secondary area to ensure that the robot starts working inside that area.
- Direction: Indicates the shortest direction for reaching the secondary area. The direction
can be clockwise or anti-clockwise. The robot exits from the charging station and follows
the wire in the indicated direction to reach the secondary area.
SECONDAY AREA 2: Function for de ning the automatic mowing of secondary area number 2.
This setting uses the same con guration parameters as those used for secondary area 1.
SECONDAY AREA 3: (only for some versions, see “Technical Speci cations”). Function
for de ning the automatic mowing of secondary area number 3. This setting uses the same
con guration parameters as those used for secondary area 1.
… 95 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga AUTOCLIP 720 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga AUTOCLIP 720 S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 96,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info