564042

Stiga AUTOCLIP 720 S Manual

94
Zoom out
Zoom in
Previous page
1/788
Next page
36
User’s manual
EN
WORK SCHEDULE 1: Function for setting the  rst time
of the robot’s working day. The cursor automatically
positions itself in the area under the  rst time (e.g.
10:00am to 1:00pm). Set the time for the start and end
of the work. Setting the time at “00:00 – 00:00” means
that the robot will not work during the  rst working time.
If the robot emits a beep and resets the time when this is
entered, it means there is an inconsistency with the time
entered or with the second working time.
WORK SCHEDULE 2: Function for setting the second
time of the robot’s working day.
WORK SCHEDULE 1
00 : 00 : 00 : 00
01
02
03
07
If it is necessary to set secondary areas, then it is preferable
to program both working times in order to increase the
mowing frequency of the area.
Approximately 4.0 hours is needed to fully charge the
battery. Therefore, it is recommended to leave an interval
of 4 hours between working time 1 and working time 2.
The setting of the time is essential for the robot’s proper functioning. Many parameters
in uence the setting of the working time, such as the secondary areas, number of batteries,
complexity of the lawn, type of grass, etc. Generally, the working hours must be increased
slightly when mowing gardens with secondary areas, with lots of obstacles and complicated
areas. Below is a table with the indicative times for con guring the robot on  rst use.
NB. Set all the weekdays at “1” – “Work Days.”
M² (sq ft) Time 1 Time 2
0400
(4304) 10:00 - 11:30
0800
(8608) 10:00 - 13:00
1200 (12912) 10:00 - 14:00
2000 (21520) 10:00 - 13:00 17:00 - 20:00
3000 (32280) 09:00 - 13:00 17:00 - 21:00
4000 (43040) 08:00 –13:00 17:00 - 22:30
5000 (53800) 07:00 –13:00 17:00 - 23:00
6000 (64560) 06:00 –13:00 17:00 - 23:59
… 94 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga AUTOCLIP 720 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga AUTOCLIP 720 S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 96,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info