564042

Stiga AUTOCLIP 720 S Manual

81
Zoom out
Zoom in
Previous page
1/788
Next page
23
User’s manual
EN
Wire laid on the ground
1. Position the wire in a clockwise direction
along the entire track and secure it with the
pegs supplied (distance of 100÷200 cm
(39.37÷78.74 in.) between each peg).
– When laying the perimeter wire make
sure to respect the rotation direction
around the  owerbeds (anti-clockwise).
– In straight stretches, fasten the wire so
that it is not too tight, curved and/or
twisted.
– In stretches that are not straight, fasten
the wire so that it is not twisted but
curves in a regular manner.
NO
wire fastening pegs
perimeter wire
wire fastening pegs
perimeter wire
OK
Buried wire
1. Dig up the ground in a regular and symmetrical manner with respect to the line traced on
the ground.
2. Position the wire in a clockwise direction along the entire length of the track at a depth of a
few centimetres (around 2÷3 cm (0.7874÷ 1.1811 in.)) so as not to reduce the quality and
intensity of the signal picked up by the robot.
3. During the laying of the wire, if necessary, secure it in some points with the pegs provided
in order to hold it in place when covering with the dirt.
4. Cover the wire with the dirt and make sure it does not twist, but remains straight, and make
sure the curved sections are regular.
… 81 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga AUTOCLIP 720 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga AUTOCLIP 720 S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 96,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info