564042
78
Zoom out
Zoom in
Previous page
1/788
Next page
20
User’s manual
EN
The area must be reachable without any rises
or drops greater than those allowed. Whether
a zone is to be de ned a “secondary area”
also depends on the size of the primary area.
The larger the primary area, the harder it will
be to reach narrow passages. More generally,
a passage narrower than 200 cm (78.74 in.) is
considered a secondary area.
The number of secondary areas managed
depends on the characteristics of the model (See
“Technical Speci cations”).
The minimum passage allowed is 70 cm (27.56
in.) from each edge of the perimeter. The perimeter
wire must be positioned at a distance of (to be
indicated below) from any objects outside the
lawn; therefore, the total passage should be 140
cm (55.12 in.)
If this passage is very long, then it is better for the
passage to be wider than 70 cm (27.56 in.).
During programming, it is necessary to con gure
the size of the secondary areas as a percentage
of the lawn, and the quickest direction for
reaching it (clockwise or anti-clockwise), as well
as the number of meters of wire needed to reach
the secondary area. See “Programming Mode.”
If the aforesaid minimum requirements are not
met and therefore, i.e. an area separated by a
rise or drop with characteristics that cannot be
managed by the robot or a passage (corridor)
narrower than 70 cm (27.56 in.) from perimeter
edge to perimeter edge, this area of the lawn
area is considered a “Closed Area.” To mark a
“Closed Area” lay the outgoing and incoming
perimeter wire in the same track at a maximum
distance of 1 cm (0.40 in.). In this case, the
robot is unable to reach the area autonomously
and must be managed as described in the
chapter “Management of Closed Areas.” The
management of “Closed Areas” reduces the
square meters that can be managed by the robot
autonomously. It is recommended to use the
“Management of Closed Areas” only for areas
smaller than 900 m2 (9684 sq.ft).
corridor with a minimum passage
of 70 cm / 27,56 inc from edge to edge.
PRIMARY AREA
SECONDARY AREA
corridor with a passage
< 70 cm / 27,56 inc.
PRIMARY AREA
CLOSED AREA
35 cm. / 13,8 inc.
drain cover
flowerbed
35 cm. / 13,8 inc.
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga AUTOCLIP 720 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga AUTOCLIP 720 S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 96,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info