564046

Stiga Autoclip 527S Manual

27
Zoom out
Zoom in
Previous page
1/578
Next page
25
User’s manual
EN
1. Press the ON key.
2. Enter the password (if prompted) (See “Password Entry”).
3. The “PAUSE” function appears on the display.
4. Enter into programming mode and select “OPERATING MODE”. Select “CLOSED
AREA” and the words “CLOSED AREA – 60 Min” (default value) will appear on the
display.
5. Press either the “+” or “-” key to set the minutes.
6. Press “Enter” to confi rm.
7. Press the “Start/Pause” key to exit the programming menu and then restart the robot.
After the set time, the robot safely stops next to the perimeter wire.
8. Restore the normal functioning of the robot as described in chapter “INITIAL START
UP – AUTOMATIC MODE”.
STARTING THE ROBOT WITHOUT THE PERIMETER WIRE
This mode can be executed with the remote control to mow areas with boundaries at least 15 cm high.
Important
When using the robot without the perimeter wire, make sure the robot does not run into obstacles, corners or dangerous
objects.
1. Press the ON key.
2. Enter the password (if prompted) (See “Password Entry”).
3. Press “Enter” to enter into programming mode. Scroll through the items until reaching “OPERATING MODE.” Set the option “NO PERIMETER.”
Press either the “+” or “-” key to set the working minutes of the robot.
4. Press “Enter” to confi rm the selection.
5. Press the “Start/Pause” key several times to exit from the menu and restart the robot.
6. Manoeuvre the robot using the remote control.
7. At the end of mowing, press the “OFF/STOP” key to safely stop the robot (see “Robot Safety Stop”).
Important
It is recommended to move the robot with the remote control when mowing inside a narrow, well-visible area, and to make
sure there are no people or pets next to the operating zones of the robot.
PASSWORD ENTRY
The robot can be protected by a password consisting of four numbers which can be enabled, disabled and personalised by the user (see
“Programming Mode”).
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga Autoclip 527S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Autoclip 527S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 115,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info