To set or change the password, it is fi rst necessary to enter the previous one and then enter the new one. Upon purchase,
the password entered by the manufacturer consists of four numbers (0000).
Important
When entering the password, you will be prompted to re-enter the password in order to ensure that it has been set correctly.
In order to not forget the password, choose a number combination that is easy to remember.
START PASSWORD: This function allows defi ning whether you want to enter a password each time the robot is turned on after a period of
inactivity (e.g. winter storage).
-
No: There is no need to enter a password each time the robot is turned on. The password will only be required to disable the alarm. The
robot requires the password to confi rm this parameter.
-
Yes: The password will be required each time the robot is started.
OPERATING MODE – PROGRAMMING MODE
Function for setting the operating mode of the robot. The robot automatically returns to “AUTOMATIC” mode when turned off.”
•
Automatic: Normal operating mode. The robot recognises the perimeter wire and returns to the charging station whenever necessary.
•
Closed area: Operating mode in closed areas with no charging station. For the correct use of this mode, refer to “USE OF ROBOT IN
CLOSED AREAS WITH NO CHARGING STATION.”
•
No border: Operating mode without recognition of the perimeter wire. Use in small areas whose whole perimeter is bounded by a wall or
fence at least 15 cm high, without installation of the perimeter wire and under the supervision of the user and with the remote control.
LANGUAGE OPTIONS – PROGRAMMING MODE
LANGUAGE: function for selecting the language to use for the messages and user menu. Scroll through the various options with the “+” or “-”
key and confi rm with “Enter”.
•
DATE FORMAT
•
TIME FORMAT
•
DISTANCE FORMAT
These functions allow personalising the date, time and distance formats.
INITIAL START UP – AUTOMATIC MODE
The automatic cycle is started during the initial start-up or after a period of inactivity.
1. Check that the height of the lawn surface to mow is compatible with the proper functioning of the robot (see “Technical Specifi cations”).
2. Adjust the cutting height as desired (see “Adjustment of Cutting Height).
3. Check that the work area has been correctly marked and that there are no impediments to the regular functioning of the robot as indicated
in the section “Preparation and Marking the Boundaries of the Work Areas” and following sections.
4. Position the robot inside the charging station.
5. Press the ON key and wait a few seconds for the robot to turn on completely.
6. If starting the robot for the fi rst time, it is necessary to program the settings. However, if starting the robot after a long period of inactivity,
check that the programmed functions correspond to the actual condition of the lawn to be mowed (e.g. addition of a pool, plants, etc.) (See
“Programming Mode”).
7. After a few seconds, the message “CHARGING” will appear on the display.
8. The robot starts to mow the lawn according to the modes programmed.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Stiga Autoclip 527S at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Stiga Autoclip 527S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.
The manual is 115,82 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
