564045
34
Zoom out
Zoom in
Previous page
1/578
Next page
32
User’s manual
EN
BLADE REPLACEMENT
1.
Stop the robot safely (see “Robot Safety Stop”).
Important
Use protective gloves to prevent injuries to your hands.
2. Turn the robot over and position it so as not to ruin the covering hood.
3. Unscrew the screws (B) to remove the blade (A).
4. Insert a new blade and fasten the screws.
5. Turn the robot back over to its operating position.
blade (A)
screws (B)
ROBOT DISPOSAL
Do not throw any polluting materials into the environment. Please dispose of the device according to the applicable laws.
In reference to the WEEE Directive (Waste of Electrical and Electronic Equipment), during the phasing out of the machine, the user must
separate the electrical and electronic components and dispose of them in special authorised waste collection centres, or take them back to
the retailer when purchasing a new one.
All the parts, which must be collected separately or disposed of in a speci c manner, are marked with a special label.
Unauthorised disposal of Waste of Electric and Electronic Equipment (WEEE) is punishable with sanctions regulated by the laws in force in
the country where the infraction took place.
Danger - Attention
Waste of Electric and Electronic Equipment may contain hazardous substances having potentially harmful effects on the
environment and on the health of people. It is recommended to dispose of this waste in the correct manner.
EC DECLARATION OF CONFORMITY
ZUCCHETTI Centro Sistemi S.p.A. Via Lungarno 305/A Terranuova B.ni (AR) ITALY
Hereby declares under their full responsibility that the products, models 2L2DE0, 2L2EV0, 2L2EL0, 2L2LL conform to the following European
standards:
Safety: CEI EN (50338: 2007-06) - (60335-1: 2008-07)
Electromagnetic Compatibility: CEI EN (55014-1: 2008 -01) - (55014-2: 1998 -10) - (55014-2/A1: 2002 -08) - (55014-2/A2: 2008 -12) CEI EN (61000-3-2:
2007-04) - (61000-3-3: 1997-06) - (61000-3-3/A1: 2002-05).
It meets the essential requirements of the following directives: :
Low Voltage Directive 2006/95/CE - Electromagnetic Compatibility 2004/108/CE – Noise Emission according to Machinery Directive 2006/42/CE
Bernini Fabrizio - Terranuova B.ni 01/10/2012
(CEO)
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga Autoclip 527 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga Autoclip 527 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 115,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info