608620

Stiga 107M HD Manual

6
Zoom out
Zoom in
Previous page
1/11
Next page
ENGLISH
EN
2.3.3 Rear mounting
The cutting deck’s rear section is secured with the
pins in fig. 13.
2.3.4 Mounting in implement lifter
The deck is mounted in the implement lifter with a
chain and snap hooks.
One snap hook is intended for the working position
and can be moved in the chain links to set the lift-
ing force.
The other snap hook is intended for the washing
position.
2.4 Controls, 107 M
2.4.1 Cutting height adjustment
The cutting height can be adjusted between 30 and
85 mm.
The setting can be adjusted to a number of fixed
positions using the lever. See fig. 9.
2.4.2 Incline forwards
The cutting deck’s rear section can be raised infi-
nitely variably.
Each line (12:J) corresponds to a raise of 5 mm.
The setting is locked with the screws (12:K).
2.4.3 Rear mounting
The cutting deck’s rear section is secured with the
catches (12:L).
2.4.4 Mounting in implement lifter
The deck is mounted in the implement lifter with a
chain and snap hooks.
One snap hook is intended for the working position
and can be moved in the chain links to set the lift-
ing force.
The other snap hook is intended for the washing
position.
2.5 Controls, 121 M
2.5.1 Cutting height adjustment
The cutting height can be adjusted between 30 and
85 mm.
Electric cutting height adjustment
The setting can be adjusted infinitely variably us-
ing a switch on the machine.
Manual cutting height adjustment
The setting can be adjusted to a number of fixed
positions using the lever (7:G).
2.5.2 Incline forwards
The cutting deck’s rear section can be raised infi-
nitely variably.
The setting is locked with the screws (7:H).
2.5.3 Rear mounting
The cutting deck’s rear section is secured with the
pins (7:I).
2.5.4 Mounting in implement lifter
The deck is mounted in the implement lifter with a
chain and snap hooks.
One snap hook is intended for the working position
and can be moved in the chain links to set the lift-
ing force.
The other snap hook is intended for the washing
position.
3 ASSEMBLY
3.1 Installing the 125 Combi Pro
1. Place the cutting deck in position in front of the
machine.
2. Install the following components on both wheel
axles:
• Washer (3:B).
• Deck mount (3:C).
• Washer (3:B).
• Circlip (3:A).
3. Remove the pins and the washers on both sides.
See fig. 2.
4. Screw the arms into each other. See fig. 4.
5. Suspend the cutting deck in the implement lift-
er. See fig. 14.
6. If the deck has electrical cutting height adjust-
ment, connect the cable to the machine’s front
right socket. See fig. 15.
3.1.1 Belt, 125 Combi Pro
The cutting deck’s rear section should rest on the
floor (it should not be lifted or secured).
Install the belt as follows:
1. Set the maximum cutting height.
2. Remove the belt cover (5:E). The number in the
figure indicates the key width.
3. Remove the belt guide (5:F).
4. Locate the belt around the machine’s belt pulley
(16:M).
5. Force the belt onto the cutting deck’s belt pul-
ley.
6. Grip the belt tensioner’s lever with your left
hand. Pull the lever and apply the tensioner to
the outside of the belt with your right hand. See
fig. 16.
7. Install the belt guide and belt cover. See fig. 5.
8. Lift up and secure the rear section of the cutting
deck.
On machines with 17” wheels:
Install the wash-
ers and the pins in the top hole. See fig. 2.
On machines with 16” wheels:
Install the wash-
ers and the pins in the middle hole. See fig. 2.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stiga 107M HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stiga 107M HD in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info