780433
42
Zoom out
Zoom in
Previous page
1/89
Next page
41
7.3.3.3. Fox 20 mm
If you have a Fox 20-mm-system, open both quick-release levers in the
bottom area of both fork legs to mount the front wheel. Put the front
wheel into the fork and mount the rotor at the same time in the brake
calliper.
Bring the front wheel into the right position between the drop-outs and
slide the axle from the right side through the drop-out and the hub.
Unfold the lever from the axle. As soon as the axle thread engages with
the thread of the right fork leg, close it by turning it clockwise.
During the first rotations you should be able to rotate the thru axle
nearly without resistance. Tighten the axle until it is hand-tight. Re-
fold the lever of the thru axle. Close both quick-release levers. From the
start of the closing movement up to about the first half of its travel the
levers should move very easily without clamping the wheel, whereas
over the second half of its travel the force you need to move it should
increase considerably. Towards the end of its travel you should clearly
feel resistance.
Use, if necessary, the palm of your hand while your fingers pull on an
immovable part, such as the fork leg, but not on a spoke or the rotor.
7.3.3.4. SR SUNTOUR QLOCK-system 15 mm
If your bike is equipped with a SR SUNTOUR QLOCK-system 15 mm, put
the wheel into the fork and mount the rotor, if available, in the brake
calliper. Bring the wheel into the right position between the drop-outs.
Open the quick-release lever of the SR SUNTOUR thru axle fully. Turn
the counter nut on the thru axle anticlockwise until the expander re-
leases. Slide the axle with open QLOCK quick-release lever and released
expander from the right side through the drop-out and the hub until
the thru axle engages with a clear “click. Now turn the quick-release
lever forcefully clockwise until the axle is hand-tight. Finish by closing
the quick-release lever like a usual quick-release lever. Make sure the
quick-release lever does not stand out to the front or to the side.
The Wheels
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stevens MTB 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stevens MTB 2014 in the language / languages: English as an attachment in your email.

The manual is 11.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stevens MTB 2014

Stevens MTB 2014 User Manual - German - 91 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info