780435
15
Zoom out
Zoom in
Previous page
1/83
Next page
14
Now you can move the handlebar/stem unit up and down as a whole.
Be sure not to pull out the stem too far. The mark on the seat post
(MIN, MAX, STOP, END etc.) should always remain within the seat
tube. Setting the stem to a lower position can only add to your safety.
Realign the handlebars with the front wheel.
Retighten the expander bolt with a torque wrench. Please observe
the maximum torque value:
Make sure the stem is firmly fixed by taking the front wheel between
your legs and trying to turn the handlebars and stem relative to the
wheel. If there is movement, you have to increase the torque value.
If the handlebars are still too high or too low, you will have to replace
the stem. This can be quite a big job, as it may be that you have to
take off all the fittings on the handlebars. Inform yourself at your
bicycle dealer about the various stem types available.
3.2.3. Stems for Threadless Systems, the Aheadset®-
System
(Aheadset® is a registered trademark of Dia-Compe which developed
the system.)
In the case of bicycles with a threadless headset system (Aheadset®)
the stem also serves to adjust the bearing preload. If you change the
position of the stem, you have to readjust the bearing play (see chapter
“The Headset”). The vertical setting range is limited by the intermediate
rings, also referred to as spacers. With flip-flop stem models it is also
possible to mount the stem the other way round to alter the handlebar
height.
Release the bolt at the top of the fork steerer tube which serves to
adjust the initial bearing pressure and remove the Ahead cap.
Release the stem clamping bolts on either side of the stem and pull
the stem off the fork. In doing so keep hold of both frame and fork to
prevent the fork from slipping off the head tube!
Adjusting the Bicycle to the Rider
Danger:
Note that the bolted
connections of stem and
handlebars have to be
tightened to the specified
tightening torques. You will
find the respective values
in chapter “Recommended
Torque Settings” or directly
on the components. If you
disregard the prescribed
values, the handlebars or
stem may come loose or
break. This can lead to a
severe crash.
Danger:
Never ride a bicycle with a
stem that has been drawn
out beyond the mark for
the maximum permissible
height! Check all bolts and
test your brakes before you
set off!
Danger: Do not combine a steel stem with aluminium
handlebars, unless this combination is expressly
approved by the manufacturers.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stevens Allround Trekking Bikes - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stevens Allround Trekking Bikes - 2014 in the language / languages: English as an attachment in your email.

The manual is 11.59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Stevens Allround Trekking Bikes - 2014

Stevens Allround Trekking Bikes - 2014 User Manual - German - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info