593143

Steinel MF 1 Manual

10
Zoom out
Zoom in
Previous page
1/27
Next page
- 18 - - 19 -
HBS 300 Highbay / HBS 200 Highbay stay-ON time
Stay-ON time is the period of time lights remain
ON after detecting the last movement. This time
can be set from 15 sec. to 30 min. Factory set-
ting is 15 min.
Time
ON
1234
Low
High
Low
High
After setup and commissioning tests are
complete, adjust the stay-ON time and light
level settings to fit the application needs.
Time Delay DIP Switch
1
ON
ON
OFF
ON
ON
OFF
OFF
OFF
N/A
2
ON
OFF
ON
OFF
ON
ON
OFF
OFF
N/A
3
ON
OFF
ON
ON
OFF
OFF
ON
OFF
N/A
4
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
Time
15 sec
1 min
5 min
10 min
15 min
20 min
25 min
30 min
override
DIP swich for setting HBS 300 Highbay / HBS 200 Highbay stay-ON time
Time
Manual
override
Setting and starting up HBS 300 Highbay / HBS 200 Highbay
Lens covers
Lens covers can be used to adjust the high bay
sensor's coverage as needed.
The plastic shrouds simply push on to the front
of the HBS 300 Highbay or HBS 200 Highbay.
LC4 shroud for reducing
HBS 300 Highbay reach
LC5 180° half-moon lens cover for
HBS 300 Highbay
LC1 aisle start cover for
HBS 200 Highbay
10
20
30
40
40 ft
13 ft
50 ft
53 ft
LC1
radial
tangential
10
20
30
40
40 ft
LC4
30 ft
22 ft 22 ft
30 ft
10
20
30
40
LC5
40 ft
35 ft
22 ft
40 50
4
Wireless interconnection by means of optional MF1 wireless module
An MF1 wireless group control module with
wireless group control capability can be added
to any HBS 300 Highbay or HBS 200 Highbay
sensor.
Stay-ON time is at least 30 sec. when using the
MF 1.
EAN MF1 .................................. 4007841736712
5
MF1 safety precautions / installation
n Please only plug the module in with the mains
power supply switched OFF. (see Fig.)
n Only use genuine replacement parts.
n The wireless module must not be plugged in
when using the Install mode.
Technology
868 MHz, bidirectional. Reach up to 100 m,
depending on the line of vision, walls, wall pro-
jections, corridor corners, wall reflections etc.
Recommendation: reliable wireless link up to
30 m is ideal.
The optional wireless receiver extends lighting
control within a group of luminaires, making it
the ideal accessory for intelligently intercon-
necting high-bay sensors.
RM 50 Highbay wireless receiver
Wireless communication
STEINEL wireless lighting controllers are
grouped together through a DIP switch address.
When a wireless presence sensor in the group
detects a movement, all devices in that group
will be switched ON. For example, when a
sensor detects the presence of a person and
switches the light ON, this switching command
will be sent to all wireless devices in this group.
All these devices then switch the light ON. Light
only switches OFF when command signals stop
being sent to the group and the last device's
stay-ON time has elapsed. The switching sig-
nals are limited by the devices' wireless reach.
Setting and starting up RM 50 Highbay (MF1)
Groups
The 5 position DIP switch on all STEINEL wire-
less devices can be used for setting 32 different
addresses or groups.
All devices in a group must have the same DIP
switch setting. The ON switching commands
only apply within a group.
12345
12345
GB
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steinel MF 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steinel MF 1 in the language / languages: English, German, French, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info