Manual Steinel IR 180 AP (page 8 of 43) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

592487

Zoom out

Zoom in

1/43

Technical specifications

IR 180 AP: HF 360 AP:

Dimensions (H x W x D):

Output:

Connection:

Contact gap:

Installation height:

Sensor technology:

Transmission output:

Angle of coverage:

Reach:

Twilight setting:

Time setting:

Permanent light:

Permanent light OFF:

Type of enclosure:

max. 1000 W (ohmic load, e.g. filament bulb)

max. 500 VA (uncompensated, inductive, cos ϕ = 0.5

e.g. fluorescent lamps)

230 V, 50 Hz

3-lead connection (L, L’, N)

, contact clearance of less than 1.2 mm between the

contacts when unit is switched off.

approx. 1.1 and 2.2 m*

Infrared sensor

180° with

90° angle of aperture

8 m max.

2 - 2000 lux

10 sec. - 30 min.

switchable (4 h)

switchable

IP 54

approx. 1.1 and 2.2 m*

5.8 Ghz

High frequency

approx. 1 mW

360° with

140° angle of aperture

1 - 8 m

continuously adjustable

2 - 2000 lux

10 sec. - 30 min.

switchable (4 h)

switchable

IP 54

* Installation above a door

Principle

With the IR 180 AP and

HF 360 AP Sensor

Switches, groping for the

light switch is finally a thing

of the past! The intelligent

sensor technology switches

the light on automatically on

entering the detection zone

and off again after the pre-

set time. This is not only ex-

tremely convenient, but also

increases safety and is en-

ergy and cost saving.

Angle of coverage: 360°

Angle of coverage: 180°

8 m

max.

8 m

max.

The IR 180 AP is equipped

with a pyro sensor which

The HF 360 AP is an active

motion detector. It reacts -

independently of tempera-

ture - to the slightest move-

ment. The integrated HF

HF 360 AP:

IR 180 AP:

detects the invisible heat

emitted by moving objects

(pedestrians, animals etc.).

The heat thus detected is

electronically converted and

switches on connected

consumers (e.g. a light). No

heat radiation is detected

through obstacles, such as

walls or glass and no

switching therefore occurs.

sensor transmits high fre-

quency electromagnetic

waves (5.8 GHz) and re-

ceives their echo. In re-

sponse to the slightest

movement in the detection

zone, the change in echo

is perceived by the sensor.

A microprocessor subse-

quently triggers almost with-

out delay the switching

command „light on“. Detec-

tion is possible through

doors, panes of glass or

thin walls.

82 x 72 x 67 mm 82 x 72 x 64 mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Steinel IR 180 AP in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Steinel IR 180 AP Manual

Product: