593129
6
Zoom out
Zoom in
Previous page
1/81
Next page
Protect the power cord from heat, oil
and sharp edges.
Beware of toxic gases and
fire hazards.
Toxic gases may occur when wor-
king on plastics, paints, varnishes
or similar materials.
Beware of fire and ignition hazards.
For your own safety, only use acces-
sories and attachments that are
specified in the operating instruc-
tions or recommended or specified
by the tool manufacturer.
Using attachments or accessories
other than those recommended in
the operating instructions or cata-
logue may result in personal injury.
Repairs must only be
carried out by a qualified
electrician.
This electric power tool complies
with the relevant safety regulations.
Repairs should only be performed
by a qualified electrician. Otherwise
the user may run the risk of acci-
dents. If this tool's main power cord
is damaged, it must be replaced
by the manufacturer or its customer
service department or a similarly
qualified person so as to avoid
hazards.
Safety warnings
- 11 -
Store your tools in
a safe place.
After use, set the tool down on its
standing surface and let it cool be-
fore putting it away.
When not in use, tools must be
stored in a dry, locked room out of
children's reach.
This tool may be used by children
aged 8 or above and by persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they are supervised or
have been given instructions on how
to use the tool safely and understand
the hazards involved.
Do not allow children to play with
the tool.
Children are not allowed to clean or
carry out maintenance work on the
tool without supervision.
Do not overload your tools.
Your work results and safety will be
enhanced if you operate the tool
within the specified output range.
After using the tool for a prolonged
period at maximum temperature,
you should reduce the temperature
before switching the tool off. This will
prolong the service life of the heating
element. Do not carry the tool by the
power cord. Do not unplug the tool
by pulling on the power cord.
- 10 -
Please familiarise yourself with these operating instructions
b
efore using this product because prolonged reliable and
trouble-free operation will only be ensured if it is handled
p
roperly.
W
e hope your new hot air tool will give you lasting
satisfaction.
Translation of the original
operating instructions
About this document
Read and observe this informa-
tion before using the tool. Failure
to observe the operating instruc-
tions may result in the tool be-
coming a source of danger.
When using electric power tools, ob-
serve the following basic safety pre-
cautions to avoid electric shock as
well as the risk of injury and fire.
Used carelessly, the tool can start an
unintentional fire or injure persons.
Check the tool for any damage
(mains connection lead, housing etc.)
before putting it into operation and
do not use the tool if it is damaged.
Do not leave the tool switched on
unattended.
Children should be supervised to
make sure they do not play with the
tool.
First time of use
A small amount of smoke may come
out of the HL 1620 when it is used
for the first time. This smoke is
caused by binding agents released
from the heater's insulating film dur-
ing the first time of use.
To let the smoke escape quickly,
the tool should be set down on its
standing surface. The area you are
working in should be well ventilated
when using the tool for the first time.
Any smoke coming out of the tool is
not harmful!
Take the ambient
conditions into account.
Do not expose electric power tools
to rain. Do not use electric power
tools when they are damp or in a
damp or wet environment. Exercise
care when using the tool in the prox-
imity of flammable materials. Do not
direct the tool at one and the same
place for a prolonged period. Do not
use in the presence of an explosive
atmosphere. Heat may be conduc-
ted to flammable materials that are
hidden from direct sight.
Protect yourself from
electric shock.
Avoid coming in contact with
grounded objects, such as pipes,
radiators, cookers or refrigerators.
Do not leave the tool unattended
while in operation.
Please read carefully and keep in a safe place.
-
Under copyright. Reproduction either in whole or in part
only with our consent.
- Subject to change in the interest of technical progress
GB
Safety warnings
GB
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steinel HL2020E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steinel HL2020E in the language / languages: All languages as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info