592483
12
Zoom out
Zoom in
Previous page
1/44
Next page
21
Operation/Maintenance
The Sensor Switch is suit-
able for automatic or con-
tact-free switching (NF 50
UP) of light. The unit is not
suitable for special burglary
alarm systems, since it
lacks the sabotage protec-
tion prescribed for this pur-
pose. The surface should
be cleaned if dirty with a
Declaration of conformity
The product complies with the following guidelines:
Low voltage directive 73/23/EEC with amendment
EMC directive 89/336/EEC with amendment
HF 360 UP and NF 50 UP:
R & TTE directive 1999/5/EC with amendments concerning radio units
and telecommunications facilities
Herzebrock, April 2003
Burkhard Steffen, Management
Functional Warranty
This STEINEL product has
been manufactured with
great care, and its oper-
ation and safety have been
tested in conformity with the
current regulations. Produc-
tion is also submitted to
final random-sample test-
ing.
STEINEL undertakes the
guarantee for perfect condi-
tion and function.
The warranty period is
36 months, starting on the
date of sale to the user. We
undertake to remedy faults
caused by material or
manufacturing defects. This
warranty undertaking shall
be performed by the repair
or replacement of the de-
fective parts, at our own
discretion.
This warranty shall not
cover damage to wearing
parts or damage and faults
caused by incorrect oper-
ation or maintenance. Fur-
ther consequential damage
to external items is exclud-
ed.
Claims under warranty
shall only be accepted if the
product is sent fully assem-
bled and well packed com-
plete with sales slip or in-
voice (date of purchase and
dealer's stamp) to the ap-
propriate Service Centre or
handed in to the dealer
within the first 6 months.
Repair Service:
Our Customer Service
Department will repair faults
not covered by warranty or
after the warranty period.
Please send the product
well packed to your nearest
Service Centre.
damp cloth (without clean-
ers).
20
Troubleshooting
Malfunction Cause Remedy
Sensor Switch
without power
Fuse blown,
not switched on
Short circuit
Sensor switch NF 50 UP
in two-way switch oper-
ation with other switches
Replace fuse; switch ON
mains switch; check
wiring with voltage tester
Check connections
NF 50 UP not capable of
two-way switch operation
(IR 180 UP / HF 360 UP / NF 50 UP)
Troubleshooting
Sensor Switch
does not switch ON
Twilight setting in
nighttime mode during
daytime operation
Additional two-way
switch OFF
Fuse blown
Readjust
Switch power on
New fuse,
check connection if
required
Sensor Switch
does not switch OFF
Continued movement
within the detection zone
Switched on light is
within detection zone of
IR 180 UP and switches
on again as a result of
temperature change
Permanent light
operation switched on
(red LED illuminates)
Other Sensor Switch
is parallel-connected
and still active
Check detection zone
Check detection zone
Switch off permanent
light operation
Await time setting of the
other Sensor Switch
Sensor Switch
keeps switching ON/OFF
Switched on light is
within IR 180 UP
detection zone
Animals moving in
IR 180 UP detection
zone
Curtains, flowers, etc.
move within the detec-
tion zone of the HF 360
UP and cause switching
again by motion
Check detection zone
Check detection zone
Check detection zone
Malfunction Cause Remedy
(only for IR 180 UP / HF 360 UP)
Sensor Switch
does not switch ON
Light bulb burnt out
Replace light bulb
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steinel HF 360 UP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steinel HF 360 UP in the language / languages: All languages as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info