592483
9
Zoom out
Zoom in
Previous page
1/44
Next page
15
Principle
With the IR 180 UP and
HF 360 UP sensor
switches, groping for the
light switch is finally a thing
of the past! The intelligent
sensor technology switches
NF 50 UP:
The NF 50 UP has a near
field sensor system that
allows contact-free on and
off switching of installed
lights. Switching of the light
is therefore possible with
damp or dirty hands. The
switch is triggered by a
movement of the hand at a
distance of max. 5 cm.
Reach 5 m max.
IR 180 UP: HF 360 UP:
The IR 180 UP is equipped
with a pyro sensor which
detects the invisible heat
emitted by moving objects
(pedestrians, animals etc.).
The heat thus detected is
electronically converted and
switches on connected con-
sumers (e.g. a light). No
heat radiation is detected
through obstacles, such as
walls or glass and no
switching therefore occurs.
The HF 360 UP is an active
motion detector. It reacts –
independently of tempera-
ture – to the slightest move-
ment. The integrated HF
sensor transmits high fre-
quently electromagnetic
waves (5.8 GHz) and re-
ceives their echo. In re-
sponse to the slightest
movement in the detection
zone, the change in echo is
perceived by the sensor. A
microprocessor subse-
quently triggers almost
without delay the switching
command "light on". Detec-
tion is possible through
doors, panes of glass or
thin walls.
Angle of coverage: 360°Angle of coverage: 180°
8 m
max.
5 cm
max.
8 m
max.
the light on automatically on
entering the room and off
again after the preset time.
This is not only extremely
convenient, but also in-
creases safety and is ener-
gy and cost saving. The NF
50 UP has a near field sen-
sor for contact-free swit-
ching.
14
Installation Instructions
Dear Customer,
Congratulation on purcha-
sing your new STEINEL
Sensor Switch and thank
you for the confidence you
have shown in us. You have
chosen a high-quality
product that has been
manufactured, tested and
packed with the greatest
care. Please familiarise
yourself with these instruc-
tions before attempting to
install the Sensor Switch as
prolonged reliable and
trouble-free operation will
only be ensured if it is fitted
correctly.
We hope your new Sensor
Switch will give you lasting
satisfaction.
System components
IR 180 UP:
Flush box
Basic element
Cover frame
Surround
Sensor unit
Button for permanent
light and permanent
light OFF
Permanent light and
permanent light OFF
indicator (red LED
behind lens)
Catch
(Design shade for
function adjustment,
folding)
Twilight setting
2 - 2000 lux
Time setting
10 sec. - 30 min.
HF 360 UP:
Flush box
Basic element
Cover frame
Surround
Sensor unit
Button for permanent
light and permanent
light OFF
Permanent light and
permanent light OFF
indicator (red LED)
Catch
(Design shade for
function adjustment,
folding)
Twilight setting
2 - 2000 lux
Time setting
10 sec. - 30 min.
Reach setting
1 - 8 m
Disconnect the power
supply before any work
on the Sensor Switch!
During installation, the
electric power cable to
be connected must be
voltage-free. Therefore,
switch off the power first
and check freedom from
voltage with a voltage
tester.
Installation of the Sensor
Switch involves work on
the mains power supply;
Safety instructions
NF 50 UP:
Flush box
Basic element
Cover frame
Surround
Sensor unit
Orientation light
(red LED)
this work must therefore
be carried out profes-
sionally in accordance
with regulations.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steinel HF 360 UP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steinel HF 360 UP in the language / languages: All languages as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info