593166
15
Zoom out
Zoom in
Previous page
1/75
Next page
- 28 - - 29 -
Functional Warranty
Declaration of Conformity
This Steinel product has been
manufactured with utmost care,
tested for proper operation and
safety and then subjected to ran-
dom sample inspection. Steinel
guarantees that it is in perfect
condition and proper working
order.
The warranty period is 36 months
and starts on the date of sale to
the consumer. We will remedy
defects caused by material flaws
or manufacturing faults. The war-
ranty will be met by repair or re-
placement of the defective parts
at our own discretion. The war-
ranty shall not cover damage to
wear parts, damage or defects
caused by improper treatment or
maintenance. Further conse-
quential damage to other ob-
jects is excluded.
Claims under the warranty will
only be accepted if the product
is sent fully assembled and well
packed complete with a brief
description of the fault as well as
a receipt or invoice (date of pur-
chase and dealer's stamp) to the
appropriate Service Centre.
Repair service:
Please ask your nearest service
centre how to proceed for repair-
ing faults not covered by the
warranty or occurring after the
warranty expires.
Troubleshooting
Light does not switch 'ON'
Light does not switch 'OFF'
Sensor switches 'OFF' in spite of
persons being present
Sensor does not switch 'OFF'
quickly enough
Sensor does not switch 'ON'
quickly enough when approached
from the front
Sensor does not switch 'ON' when
persons are present in spite of it
being dark
No supply voltage
Lux setting too low
No motion detection
Lux setting too high
Stay-'ON' time running out
Interference from sources of
heat, e.g.: fan heater, open
doors and windows, pets,
light bulb/halogen floodlight,
moving objects
Stay-'ON' time too short
Light-level threshold too low
Stay-'ON' time too long
Reach is reduced when
approached from the front
Lux setting too low
Check supply voltage
Slowly increase lux setting
until light switches 'ON'
Ensure unobstructed sensor
vision
Check detection zone
Reduce lux setting
Wait until stay-'ON' time
elapses; reduce stay-'ON'
time if necessary
Use stickers to mask out
stationary sources of
interference
Increase stay-'ON' time
Change light threshold
Reduce stay-'ON' time
Install additional sensors
Reduce distance between
two sensors
Sensor deactivated by
switch/button?
Semi-automatic mode?
Increase light-level threshold
Malfunction Cause Remedy This product complies with
- Low Voltage Directive 2006/95/EC
- EMC Directive 2004/108/EC
- RoHS Directive 2011/65/EC
- WEEE Directive 2012/19/EC
GB
PC PRO HF360_DualHF_Zentraleuropa.indd 28-29PC PRO HF360_DualHF_Zentraleuropa.indd 28-29 11.09.13 10:3811.09.13 10:38
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steinel DUAL HF COM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steinel DUAL HF COM in the language / languages: All languages as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info