593119
9
Zoom out
Zoom in
Previous page
1/33
Next page
Operation/Maintenance
This product complies with
the European Directive on
Low-Voltage Appliances,
Functional Warranty
Declaration of conformity
06/95/EC and the EMC
Directive 04/108/EC.
This Steinel product has been
manufactured with utmost
care, tested for proper
operation and safety and
then subjected to random
sample inspection. STEINEL
guarantees that it is in perfect
condition and proper working
order. The warranty period is
36 months and starts on the
date of sale to the consumer.
We will remedy defects
caused by material flaws or
manufacturing faults. The
warranty will be met by repair
or replacement at our own
discretion. The warranty does
not cover damage to wear
parts or damage and defects
caused by improper treatment,
maintenance or the use of
non-genuine parts. Further
consequential damage to
other objects is excluded.
Claims under the warranty
will only be accepted if the
unit is sent fully assembled
and well packed with a brief
description of the fault, a
receipt or invoice (date of
purchase and dealers stamp)
to the appropriate Service
Centre.
Repair Service:
Our Customer Service
Department will repair faults
not covered by warranty or
after the warranty period.
Please send the product well
packed to your nearest
Service Centre.
The CeilingSensorLight is
suitable for switching on a
light automatically. Weather
can affect operation of the
sensor. Strong gusts of wind,
snow, rain and hail can cause
switching errors, since the
sudden temperature changes
cannot be distinguished from
heat sources. The detection
lens can be cleaned with a
damp cloth (without
detergents) if dirty.
Troubleshooting
Malfunction
Cause
Remedy
CeilingSensorLight
without power
CeilingSensorLight
does not switch on
CeilingSensorLight
does not switch off
CeilingSensorLight
switches on when it
should not
CeilingSensorLight
reach modification
Red LED is constantly
illuminated, even without no
permanent light setting
W
Fuse has blown; not
switched ON; break in
wiring
W
Short circuit
W
Mains switch OFF
W
Replace fuse, switch on
mains switch, check wiring
with voltage tester
W
Check connections
W
Switch power ON
W
Twilight setting in nighttime
mode during daytime
operation
W
Bulb burnt out
W
Mains switch OFF
W
House fuse faulty
W
Detection zone not
correctly adjusted
W
Product’s internal electrical
fuse has been activated
(LED illuminates
permanently)
W
Readjust (control e)
W
Replace light bulb
W
Switch power on
W
New house fuse, check
connection if necessary
W
Readjust
W
Switch off, eliminate short
circuit if appropriate and
switch on again
W
Continued movement
within the detection zone
W
Dimming set to 50 %
W
Wind is moving trees and
bushes in the detection
zone
W
Cars in the street are
detected
W
Sunlight shining on the
lens
W
Sudden temperature
changes due to weather
(wind, rain, snow) or
exhaust air from fans or
open windows
W
Adjust zone
W
Adjust zone
W
Mount sensor in a
protected place or change
detection zone
W
Adjust detection zone or
install in a different place
W
Differing ambient
temperatures
W
Use shrouds to define
detection zone precisely
W
Product’s internal electrical
fuse has been activated
W
Bulb burnt out
W
Bulb with more than 100 W
connected
W
Switch off, eliminate short
circuit if appropriate and
switch on again
W
Change bulb
W
Switch off SensorLight,
insert a bulb with max.
100 W and switch on again
W
Check detection zone and
readjust if necessary
W
Readjust dimming
GB
1716
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steinel DL 750 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steinel DL 750 S in the language / languages: All languages as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info