593119
8
Zoom out
Zoom in
Previous page
1/33
Next page
Permanent light function
If a power switch is installed
in the supply lead, the
following functions are
possible in addition to simply
switching ON and OFF:
Sensor operation
1) Switch on the light:
Switch 1 x OFF and ON
The light remains on for the
set time.
2) Switch off light:
Switch 1 x OFF and ON
The light goes out or
transfers to sensor operation.
Permanent light operation
1) Switch on the light:
Switch 2 x OFF and ON
The light is set to permanent
illumination for 4 hours (the
red LED illuminates behind
the lens).
It subsequently changes
automatically to sensor oper-
ation (red LED goes out).
2) Switch off light:
Switch 1 x OFF and ON
The light goes out or changes
to sensor operation.
Reach setting/adjustment
Assuming an installation
height of 2.5 m, the maximum
reach of the sensor is 12 m.
Optimum adjustment of the
detection zone is possible
according to needs. The
shrouds provided serve to
cover any desired number of
lens segments and individu-
ally reduce the reach. False
switching by cars and
Important:
The switch should be
operated repeatedly in short
succession (in the range of
0.5 – 1 sec.)
pedestrians, etc. is therefore
ruled out, or risk areas
deliberately monitored.The
shrouds can be divided
vertically or horizontally along
the grooved divisions, or cut
with scissors 3. After
removing the decorative ring
4, the shrouds are to be
suspended on the upper part
of the sensor lens.
The decorative ring is
subsequently to be reapplied
and the shrouds are fixed
firmly in place.
Fine adjustment is also
possible by turning the
sensor housing by ± 60° 5.
5 sec. - 15 min.
max. 4 hours
1 x OFF/ON
2 x OFF/ON
Functions
Once you have installed the
housing and connected the
CeilingSensorLight, it can be
Twilight setting
(threshold)
ee
ee
e
Continuously adjustable
sensor response threshold
from 2 – 2000 lux.
Adjustment control set to 1
= daylight operation, approx.
2000 lux. (factory setting)
Adjustment control set to 6
= night-time operation
approx. 2 lux.
The adjustment control must
be set to 1 (daylight
operation) when setting the
detection zone in daylight.
Switch-off delay
(time setting)
ff
ff
f
Continuously adjustable light
duration of 5 sec. to 15 min.
Adjustment control set to 1
= shortest time
(5 sec., factory setting)
Adjustment control set to 6
= longest time (15 min.)
When setting the detection
zone, it is recommended to
select the shortest time
(setting 1).
Brightness control
(Watt-o-matic)
gg
gg
g
Continuously adjustable con-
stant light from 0 – 50 %.
When movement is detected,
the light switches from, say,
20 watts maintained light
output to maximum output
(100 watts).
Adjustment control set to 1
= no dimming (factory setting)
Adjustment control set to 6
= greatest dimming
If this control is rotated, the
red LED (behind the lens)
flashes and the light illumin-
ates with the set brightness.
After release, the dimming
level can be further adjusted
for approx. 3 sec. (LED con-
tinues to flash).
Soft light illumination
The CeilingSensorLight has a
soft light illumination function.
This means that the light
does not switch directly to full
put into operation. After remo-
ving the decorative ring d,
the adjusting screws for
twilight, time and brightness
control are visible.
output when switched on, but
the brightness is slowly incre-
ased to 100% within two
seconds. The electronics
operate equally gently when
switching off.
2 - 2000 lux approx. 5 sec. - 15 min. 0-50 %
1514
GB
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steinel DL 750 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steinel DL 750 S in the language / languages: All languages as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info