536223

Steba IK 300 SC Manual

12
Zoom out
Zoom in
Previous page
1/24
Next page
12
When the failure code E0 is in the display then the used pot or pan is not
suitable induction cookers. The appliance beeps 9 times and after ca 1 minute
the appliance will switch to the stand-by mode.
Temperature mode
This function is suitable for roasting meat and vegetables.
Place the pot in the middle of the cooking area.
Touch ON/OFF one time and after that 3 times the function button . A red LED
bellow the temperature symbol and in the display 180 can be seen. The cooling fan
starts to work. With the buttons or the temperature can be adjusted in 20
degree steps. During the cooking the temperature can be adjusted at any time. The
build in sensor keeps the temperature at about the adjusted temperature. The tem-
perature can be adjusted from 60°C up to 240°C.
When the failure code E0 is in the display then the used pot or pan is not
suitable induction cookers. The appliance beeps 9 times and after ca 1 minute
the appliance will switch to the stand-by mode.
Timer
The temperature or power must be adjusted first, as described above. Touch the func-
tion button so many times, until the red LED bellow the Timer symbol is blinking.
The display shows „0“. Now there is 5 seconds time to adjust the time by pressing the
button in steps of 5 minutes. The time can be adjusted from 5 to 180min. Pressing
the button decreases the time by 5 minutes. When the or button is pressed
one time the time increases or decreases by 5 minutes and a beeping noise can be
heard. When the or is pressed for a longer period no beeping sound can be
heard and the time can be adjusted faster.
If you want to change the time during the cooking touch the function button
until the timer LED is blinking. Now you have ca 5 seconds time to change
the timer setting.
When the function temperature and the timer is used and it is the intention to switch
to the power mode, then the Timer is not deleted.
When the ON/OFF button is touched during the cooking then the program will be
deleted and the appliances switches to the stand-by mode.
If the adjusted time runs out, the appliance will switch to the stand-by mode.
Residual heat „H“
When the glass plate gets hotter than ca 60°C the residual heat symbol „H“ can be
seen in the display and vanishes after the glass plate cools down. When the residual
heat light „H“ is on, then do not touch the cooking area. Danger of burns!!!
Please notice that the cooling fan is running during cooking to cool down the elec-
tronic inside.
To protect the electronic the cooling fan will work some minutes after the appliance
is switched off. This avoids that the appliance do not overheat and be damaged. Only
unplug the appliance after the cooling fan switched off by itself.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Steba IK 300 SC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Steba IK 300 SC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info