619116
10
Zoom out
Zoom in
Previous page
1/30
Next page
TRAC
SCT
X
CROSS
TRAINER
O
WNER
S
M
ANUAL
A
SSEMBLY AND
S
ETUP
UNPACKING
NOTE: Do not remove the base from the shipping carton at this time.
Remove the top cover from the shipping carton. Remove all parts and shipping supports (except the base) from the carton, and
verify that the following parts are included in your shipment:
Description Qty
Base 1
Display 1
Upper Body Arms 2
End Caps 2
Bolt, Allen Head, __________ 4
Description Qty
Bolt, Hex Head, __________ 8
Screw, Phillips Head, ___________ 8
Flat Washer, ___________ 4
Lock Washer, ___________ 8
T
OOLS
R
EQUIRED
Your STAR TRAC S-CTx CROSS TRAINER can be assembled using the following tools:
Metric Hex Key Wrenches
Metric Open-End Wrenches
Metric Ratchet Socket Wrench Set
Torque Wrench
Channel Lock Pliers
Vice Grip Pliers
Rubber Mallet
Phillips Head Screwdriver
Your STAR TRAC S-CTx CROSS TRAINER includes a hex key set and combination open-end wrench.
ASSEMBLY
1. Unpack and Position the Base
CAUTION: The rear end of the base is very heavy. Two persons are
needed to lift this end when moving the base.
Cut the long edge of the shipping carton base at both ends. Fold
the flap down to make a ramp.
With the aid of a helper, lift the rear end of the base, and roll the
base off of the shipping carton platform. Place the base on the floor
in the location where the unit will be used. Be sure the chosen
location is level.
2. Install the Display
NOTE: You will need someone to assist you to install the display.
Have the person who is assisting you hold the display while you
route the display cables and connect the neck.
Have your helper hold the display close the neck on the base. Plug
the display power and I/O cables from the base into the mating
display connectors.
Once display power and I/O cables are connected, route the coaxial
cable up the full length of the display neck before seating the
display unit on the base.
NOTE: The round coaxial cable is not used.
Ste
p
1
Step 2a
10 STAR
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for StarTrac S-CTx Cross Trainer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of StarTrac S-CTx Cross Trainer in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info