618989

StarTrac 7290 - Studio 7 Manual

19
Zoom out
Zoom in
Previous page
1/26
Next page
Star Trac Studio Series Group Cycle Bikes Owner’s Manual |
19
Adjusting Chain Tension on the Studio 3
The chain on your Studio 3 bike has been factory set and lubricated. It should not require adjustment initially.
Over time, you will need to adjust the tension, particularly when the chain is still somewhat new and the bike has
been ridden several times. Following this initial break-in period, the chain should not require frequent adjustment.
Evidence of a loose chain is the feeling of backlash in the cranks. Often riders will describe this backlash as a
“clicking” sound. To test for backlash, stand on the pedals with the pedals at 3 and 9 o’clock, and hold down on
the brake. If the cranks wiggle back and forth, this is backlash and indicates that the chain must be adjusted.
CAUTION: Improper chain adjustment will cause premature wear and may void the warranty.
To adjust the chain on the Studio 3:
1. Remove the axle nut cover from the right side of the chain guard.
2. Using an 18 mm open end wrench or socket and socket wrench, loosen the axle nuts on both sides of the
flywheel.
3. Using a 10mm open end wrench, loosen the lock nuts on the chain adjustment screws.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for StarTrac 7290 - Studio 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of StarTrac 7290 - Studio 7 in the language / languages: English as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info