Proper bike setup gives you a more comfortable ride and reduces your risk of injury.
SEAT HEIGHT
At the proper height, there should be a slight bend in your knee when you’re at the
bottom of a pedal stroke.
FORE/AFT POSITION
Once the proper height has been achieved, adjust the seat forward or back so that when
the feet are in the 3 o'clock and 9 o'clock positions, the forward knee is directly over the
pedal axle. Recheck the seat height again after making the fore/aft adjustment, as
moving the seat forward and backward can have the same effect as moving it higher or
lower.
HANDLEBAR HEIGHT
Position the handlebar at the same height as your seat, or higher if you feel any discomfort in your back.
FOOT POSITION
Place the balls of your feet securely in the toe cages, with the ball of the foot (or the widest part of your shoe) over the center of the pedals. As you pedal,
concentrate on keeping feet flat, which enables a more powerful pedal stroke. The front of the shoe may not completely fill the toe cage.
RESISTANCE CONTROL
Pedaling resistance is controlled by the Push Brake System knob located below the handlebar. Resistance adjustments can be made while riding to vary
the intensity of your workout. To increase resistance, turn the Push Brake System knob clockwise (+); to decrease resistance, turn the knob
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for StarTrac 7060 Series - Spinner at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of StarTrac 7060 Series - Spinner in the language / languages: English as an attachment in your email.
The manual is 3,43 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.