Manual Starkey SurfLink Programmer (page 16 of 20) (English)

626431

Zoom out

Zoom in

1/20

Note 1: At 80 MHz and 800 MHz, the higher frequency range applies.

Note 2: These guidelines may not apply in all situations. Electromagnetic

propagation is affected by absorption and reﬂection from structures, objects

and people.

Field strengths from ﬁxed transmitters, such as base stations for radio (cellular/

cordless) telephones and land mobile radios, amateur radio, AM and FM radio

broadcast and TV broadcast cannot be predicted theoretically with accuracy.

To assess the electromagnetic environment due to ﬁxed RF transmitters, an

electromagnetic site survey should be considered. If the measured ﬁeld strength

in the location in which the SurfLink Programmer is used exceeds the applicable

RF compliance level above, the SurfLink Programmer should be observed

to verify normal operation. If abnormal performance is observed, additional

measures may be necessary, such as reorienting or relocating the SurfLink

Programmer.

Over the frequency range 150 kHz to 80 MHz, ﬁeld strengths should be less

than 3 V/m.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Starkey SurfLink Programmer in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Starkey SurfLink Programmer Manual

Product: