Manual Stanley STR-4 in 1 (page 43 of 240) (English, German, Danish, French, Italian, Swedish, Norwegian, Finnish)

720594

Zoom out

Zoom in

1/240

Applications

Preparations

Use pruning shears to ﬁrst remove the thick branches.

Sequence of cutting

If a round cut is necessary, perform the cut in several

steps.

Cutting techniques

Vertical cut:

Move the blade in an arc to the hedge on and off. Use

both sides of the blade.

Horizontal cut:

Hold the blade at an angle of 0° to 10° and move the

hedge cutter in the horizontal direction.

Move the blade in an arc to the edge of the hedge so

that the wastes fall to the ground.

Horizontal Cut

Cut close to the ground in a standing position, e.g. low

bushes A 19.

Overhead Cut

Hold the shaft straight and set a 90-degree angle of the

blade to the top part of a hedge to be cut A 50.

Vertical cut

Cutting, without standing directly next to the hedge, e.g.

if there is a bed between the operator and the hedge A

51.

Horizontal Cut

Cutting, without standing directly in front of the hedge,

for example

B. When it is cut away over a bed A 52.

A49

A50

A51

A52

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STR-4 in 1 in the language / languages: English, German, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley STR-4 in 1 Manual

Product: