Manual Stanley STR-4 in 1 (page 25 of 240) (English, German, Danish, French, Italian, Swedish, Norwegian, Finnish)

720594

Zoom out

Zoom in

1/240

Press the primer (25) 6 times.

• Start the machine by controlled pulling on the cable (6).

• While doing so, press the device with the 2nd hand on

the ﬂoor.

ATTENTION: Never set foot on the shaft or kneel on it.

Now press the release mechanism (4) and then the

throttle lever (8) until the device is running smoothly and

has reached the full speed.

Start with a warm engine

- Corresponds to the procedure as with cold engine. Choke lever is always in the "ON" position.

As soon as the device is running, the choke lever (24) can

be reset to the "ON" position again.

Switching off:

- Start the engine to return without gas to idle speed.

Set the operating switch (3) at the operating handle in the

Off-position "O".

ATTENTION: The cutting device continues to rotate

after switching off the engine for a few seconds.

Hold both handles tight up to complete standstill of

the cutting device.

A16

A17

A18

A19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STR-4 in 1 in the language / languages: English, German, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley STR-4 in 1 Manual

Product: