720751

Stanley STHT1-77341 Manual

15
Zoom out
Zoom in
Previous page
1/210
Next page
STHT77341
15
Vertical Beam Accuracy (See figure
J
)
•
J
1
Measure the height of a door jamb or reference point
to get distance D
1
. Place laser tool as shown with laser
ON. Aim vertical beam towards door jamb or reference
point. Mark points P
1
, P
2
, and P
3
as shown.
•
J
2
Move laser tool to opposite side of door jamb or
reference point and align the same vertical beam with
P
2
and P
3
.
•
J
3
Measure the horizontal distances between P
1
and the
vertical beam from the 2nd location.
• Calculate the maximum offset distance and compare
to D
2
.
• If D
2
is not less than or equal to the calculated
maximum offset distance the tool must be returned
to your Stanley Distributor for calibration.
Maximum Offset Distance:
= 0,5
mm
m
x D
1
m
Maximum
= 0,05
in
ft
x D
1
ft
Compare: (See figure
J
3
)
D
2
≤ Maximum
Example:
• D
1
= 2 m, D
2
= 0,5 mm
• 0,5
mm
m
x 2 m = 1.0 mm
(maximum offset distance)
• 0,5 mm ≤ 1,0 mm
(TRUE, tool is within calibration)
Side Vertical Beam Accuracy (See figure
J
)
•
K
1
You will need at least 1,5m (16ft ) of floor space and
possibly an assistant for this check.
•
K
2
Place the laser unit on a level flor and turn on all
beams.
•
K
3
Measure exactly 0.91 m (3ft )from the center of the
laser unit along the vertical beam of the laser cross. To
easily reference the center of the laser unit start the
first measurement againsts the front edge of the laser
unit, measure out 0.91 m (3ft), and then subtract 30mm
(1.18in). Mark this point P
1
.
• Measure exactly 1.22 m (4ft) out from the center of the
instrument along the 90 vertical reference beam, and
then subtract 30mm (1.18in). Mark this point P
2
.
• Measure from P
1
to P
2
; this should equal 1.522m ±
0.75mm (5ft ±1/32 in). .
• If D
1
is not less than or equal to the calculated
maximum offset distance the tool must be returned
to your Stanley Distributor for calibration.
• Repeat these steps as needed, to recheck the
measurements .
Cross90 GB_STHT77341.indd 15 01/07/2013 09:50
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley STHT1-77341 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley STHT1-77341 in the language / languages: All languages as an attachment in your email.

The manual is 3,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info