720738
12
Zoom out
Zoom in
Previous page
1/36
Next page
ENGLISH (Original instructions)
12
Important! To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(other than those listed in this manual) should be
performed by authorized service centers or other
qualified service personnel, always using identical
replacement parts.
ACCESSORIES
We recommend that you purchase your accessories from the
same store that sold you the tool. Use good quality
accessories marked with a well- known brand name. Choose
the type according to the work you intend to undertake. Refer
to the accessory packaging for further details. Store personnel
can assist you and offer advice.
Protecting the Environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY product needs
replacement, or if it is of no further use to you, do not dispose
of it with household waste. Make this product available for
separate collection.
STANLEY provides a facility for the collection and
recycling of STANLEY products once they have
reached the end of their working life. To take
advantage of this service please return your product to any
authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local STANLEY office at the address
indicated in this manual. Alternatively, a list of authorised
STANLEY repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
Notes
STANLEY’s policy is one of continuous improvement to our
products and as such, we reserve the right to change product
specifications without prior notice.
Standard equipment and accessories may vary by country.
Product specifications may differ by country.
Complete product range may not be available in all countries.
Contact your local STANLEY dealers for range availability.
- Remove the wookpiece at first. Warning: Be careful of
your hands not toughing the saw blade.
- Press the overloaded protector(22) and connect the plug
again, the machine can be resumed to work. (Fig U)
APPLICATIONS
1. Make sure the kerf is made on the scrap side of the
measuring line.
2. Cut the wood with the finished side up.
3. Always have a proper support for the wood as it comes
out of the blade.
4. Make a test cut for important cuts.
5. Always use the correct blade depth setting. The top of the
blade teeth should clear the top of the material being cut
by 1⁄8” (3 mm) to 1⁄4” (6 mm).
6. Inspect the work-piece for knots or nails before beginning
a cut. Remove any loose knots with a hammer.
7. Always use clean, sharp, properly-set blades. Never make
a cut with a dull blade.
8. When making a cut, use steady, even pressure. Never
force a cut.
9. DO NOT cut wet or warped lumber.
10. Always hold your work-piece firmly with both hands or use
a push stick.
MAINTAIN TOOLS WITH CARE
Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance. Keep tools sharp and
clean for better and safer performane. Inspect tool cords
periodically and if damaged, have repaired by an authorized
service facility. Your power tool requires no additional
lubrication or maintenance. There are no user serviceable
parts in your power tool. Never use water or chemical
cleaners to clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free of dust. If
you see some sparks flashing in the ventilation slots, this is
normal and will not damage your power tool. If the supply cord
is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a
hazard.
U
22
12


Need help? Post your question in this forum.

Forumrules
1

Forum

stanley-sst1800

Reset search

  • which screw to open to adjust the saw blade with the table slot? Submitted on 9-10-2022 at 02:28

    Reply Report abuse
  • where to align the saw blade with the table slot for stanley SST1800w?
    Submitted on 9-10-2022 at 02:20

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SST1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SST1800 in the language / languages: English, French as an attachment in your email.

The manual is 5,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info