Manual Stanley SPT-302-720 (page 26 of 233) (English, German, French, Italian, Finnish)

720581

Zoom out

Zoom in

1/233

5. Carefully remove the hex nut which

secures the hex shaft to the snow thrower

frame and lightly tap the shaft’s end to

dislodge the ball bearing from the right

side of the frame. Be careful not to damage

the threads on the shaft.

6. Remove the other bearing from the left side

of the frame by removing the snap ring.

7. Carefully position the hex shaft downward

and to the left before carefully sliding the

friction wheel assembly off the shaft.

8. Follow the previous steps in reverse order

to reassemble.

If you only want to replace the rubber ring,

proceed as follows:

1. Remove the eight screws which secure the

friction wheel’s side plates together.

2. Remove the rubber ring from between the plates.

3. Reassemble the side plates with a new rubber

ring.

When reassembling the friction wheel

assembly, make sure that rubber ring is

centered and seated properly between the

side plates. Tighten each screw only one rotation

before turning the wheel clockwise and

proceeding with the next screw on the other side

of the wheel. Repeat this process several times to

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SPT-302-720 in the language / languages: English, German, French, Italian, Finnish as an attachment in your email.

The manual is 23,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley SPT-302-720 Manual

Product: