720580
29
Zoom out
Zoom in
Previous page
1/233
Next page
29
Loss of power 1. Spark plug wire loose.
2. Gas gap vent hole plugged.
3. Dirty or clogged muffler.
1. Tighten spark plug wire.
2. Clean or replace fuel cap.
3. Clean or replace muffler.
Loss of traction drive 1. Drive control cable not adjusted
properly.
2. Drive belt loose or damaged.
3. Friction wheel worn.
1. Adjust drive control cable.
2. Replace drive belt.
3. Replace friction wheel.
Loss of snow discharge or
slowing of snow discharge
1. Discharge chute clogged.
2. Augers or impeller jammed.
3. Auger control cable not adjusted
properly.
4. Auger belt loose or damaged.
5.Shear pin(s) sheared.
6. Throttle not in FAST position
when throwing snow.
7. Moving too fast to clear the snow.
8. Throwing too much snow.
9. Trying to remove extremely heavy
or wet snow.
10. Auger is frozen in place.
1. Unclog discharge chute.
2. Remove debris or foreign object
from augers or impeller.
3. Adjust auger control cable.
4. Replace auger belt.
5. Replace with new shear pin(s).
6. Move throttle to FAST position.
7. Shift into a lower gear.
8. Reduce speed and width of
swath.
9. Do not overload with extremely
heavy or wet snow.
10. Move unit to a warm place to
thaw.
Discharge chute either
does not lock into place or
does not move
1. The discharge chute control not
adjusted properly.
2. Chute assembly incorrectly
1. Adjust the discharge chute
control.
2. Disassemble chute control and
reassemble as instructed in this
manual.
Machine does not properly
clear the snow of the surface
1. The skid shoes and/or scraper
blade not adjusted properly.
2. The pressure in the tires not equal.
1. Adjust the skid shoes and/or the
scraper blade.
2. Check and adjust the pressure
in one or both tires.
G
B
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SPT-270-720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SPT-270-720 in the language / languages: English, German, French, Italian, Finnish as an attachment in your email.

The manual is 23,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info