720580
28
Zoom out
Zoom in
Previous page
1/233
Next page
28
11. TROUBLE SHOOTING
Problem Cause Remedy
Electric starter does
not turn(on models so
equipped)
1. Extension cord not connected.
2. The extension cord is worn,
corroded, or damaged.
3.The power outlet is not energized.
1. Connect the extension cord to
the outlet and/or the machine.
2.Replace the extension cord.
3. Have a qualified electrician
energize the outlet.
Engine fails to start 1. Choke not in CHOKE position.
2.Engine not primed.
3.Engine is flooded.
4.Fuel shut-off valve closed.
5. Throttle in STOP position or ON/
OFF switch is OFF.
6. Spark plug wire loose or
disconnected.
7.Fuel tank empty or stale fuel.
8.Faulty spark plug.
9.Safety ignition key is not inserted.
10. The engine oil level in the engine
crankcase is too low or too high
1. Move choke to CHOKE position.
2. Prime engine as instructed in
this manual.
3. Wait a few minutes before
restarting, do not prime.
4.Open fuel shut-off valve.
5. Move throttle to FAST position
or ON/OFF switch to ON Position.
6. Connect or tighten spark plug
wire.
7. Fill tank with clean, fresh
gasoline.
8. Clean, adjust gap, or replace.
9. Insert safety ignition key.
10. Add or drain oil to adjust the oil
level in the engine crankcase.
Engine idles or runs
roughly
1. Engine running on CHOKE.
2. Fuel tank is nearly empty or stale
fuel.
3.Contaminated fuel supply.
4.Carburetor out of adjustment.
5.Engine over-governed.
6. The fuel shutoff valve is not
completely open or blockage in
fuel line.
7.Spark plug wire loose.
8.Faulty spark plug.
9. The engine oil level in the engine
crankcase is too low or too high.
1. Move choke lever to RUN
position.
2. Fill tank with clean, fresh
gasoline.
3. Replace with clean fuel.
4 . Contact a qualified repair
personnel.
5. Contact a qualified repair
personnel.
6. Open the fuel shutoff valve or
clean fuel line.
7. Tighten spark plug wire.
8. Clean, adjust gap, or replace.
9. Add or drain oil to adjust the oil
level in the engine crankcase.
The engine overheats Carburetor not adjusted properly. Contact a qualified repair
personnel.
Excessive vibration Loose parts or damaged parts. Tighten all fasteners or replace
damaged parts.
G
B
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SPT-270-720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SPT-270-720 in the language / languages: English, German, French, Italian, Finnish as an attachment in your email.

The manual is 23,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info