Manual Stanley SLM-196-510-SP (page 12 of 93) (English, German, Danish, Italian, Portuguese, Swedish, Norwegian, Finnish)

720574

Zoom out

Zoom in

1/93

overloaded.

• Run the equipment at walking speed in lines that are

as straight as possible.

For uninterrupted mowing, the lines should always

overlap by a few centimetres.

• Do not move backwards.

• On slopes, always work across the slope.

• If the blade comes into contact with a foreign body,

switch off the engine immediately. Wait until the blade

is stationary and check the equipment for damage.

Restart work only if the equipment is undamaged.

• Switch off the equipment during longer breaks and for

transportation and wait until the blade is stationary.

Starting and Stopping the Engine

- Check the petrol and oil levels regularly and reﬁll in

time.

- Start the equipment on a sturdy, level base, if possible

not in long grass. Ensure that the cutting tool is touching

neither objects nor the ground.

Start the Engine:

1. Pull the safety catch (3) towards the handle bar and

hold it.

2. Pull the starter cord (23) and the engine starts.

Stopping the Engine:

3. Release the safety catch (3), the engine stops and the

blade is slowed.

Mowing

1. Start the engine (see above).

2. Wheel drive on: pull the drive catch (1) towards the

handle bar. The mower moves forwards.

3. Wheel drive off: release the drive catch (1). The

equipment stops.

Setting the Cutting Height

The equipment has 8 positions for setting the cutting

height.

1. Pull the lever (18) outwards and push it to the desired

position 1-8 (Fig.11).

2. Push the lever (18) back in.

Emptying the Grass Collection Box

Through the observation window ﬁtted in the rear impact

protection ( 7), you will see when the grass collection

box is full.

1. Stop the engine and wait until the blade is stationary.

2. Lift the rear impact protection (7) and remove the

grass collection box (20).

3. Empty (see “disposal / environmental protection“

chapter) and reassemble the grass collection box (20).

Mowing with the Mulch Kit

When mulch mowing, the grass is cut, chaffed and

spread on the lawn all in one go. The cut grass serves as

a natural fertiliser.

Tips for Mulch Mowing:

• Cut the grass back by 2 cm from a grass height of 4-6

cm.

• Use sharp cutting blades.

• Do not mow wet grass.

7. Cleaning and Maintenance

Have any repair and maintenance work not

described in these instructions carried out by a

specialist workshop. Use only original replacement

parts. Risk of accidents! Carry out maintenance

and cleaning work strictly with the engine switched

off and spark plug connectors removed. Risk of

injury! Allow the equipment to cool before any

maintenance and cleaning work. Elements of the

engine are hot. Risk of burning!

Cleaning and General Maintenance Work

Tip the Equipment:

To clean the underside of the equipment, tip the

equipment backwards on the upper handle bar (2).

To prevent the equipment from tipping back,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SLM-196-510-SP in the language / languages: English, German, Danish, Italian, Portuguese, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley SLM-196-510-SP Manual

Product: