720566
9
Zoom out
Zoom in
Previous page
1/92
Next page
9
1. Slide the wheels over the stub axles. Secure with
hairpin retainers and flat washers.
2. Three holes on the stub axle allow to adjust
the distance between the wheels, pull
out the pin first, adjust the wheels to the
suitable distance, then tighten with the pin.
C
X1
X1
Ø14 X 100
3. Pull up the spring bolt and put the upper pipe
of the wheels bracket into the mounting bracket.
Align two ends of the pipe with the holes. Slide the
bolt in and secure with the clips.
Paving Pad Kit
The transparent rubber Paving Pad allows to
compact concrete paving slabs, stones, bricks
and blocks silently and gently.
For #29660, #29665
For #29642, #29655
For #29640
EM10 X 30 X 3
Attach the Paving Pad onto the Base Plate
as shown. Align the holes in the Base Plate,
Paving Pad and Clamp Plates, and secure it
with 3 bolts M10x30 and lock washers. (Only 2
bolts and lock washers for #29640.)
Engine Oil
OIL HAS BEEN DRAINED FOR SHIPPING.
Failure to fill engine sump with oil before starting
engine will result in permanent damage and void
engine warranty.
Add oil according to Engine Manual packed
separately with your tiller.
G
B
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SGC-13000N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SGC-13000N in the language / languages: English, German, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info