Manual Stanley SGC-13000N-T (page 16 of 92) (English, German, Danish, Polish, Swedish, Norwegian, Finnish)

720567

Zoom out

Zoom in

1/92

4. Allow the engine to cool. Remove the

spark plug and put 60 ml of SAE-30 of

high quality motor oil into the cylinder. Pull

the starter rope slowly to distribute the oil.

Replace the spark plug.

Remove the spark plug and drain all

of the oil from the cylinder before

attempting to start the unit after storage.

5. Use clean cloths to clean off the outside of

the compactor and to keep the air vents

free of obstructions.

Do not use strong detergents or petroleum

based cleaners when cleaning plastic

parts. Chemicals can damage plastics.

5. Pull up the spring bolt and fold up the

wheels bracket.

6. Carefully fold the handle down. Do not allow

control cables to become pinched or bent.

7. Store your plate compactor in upright

position in a clean, dry building that has

good ventilation.

LIFTING/TRANSPORTING

See technical data for the weight of the machine.

To avoid burns or fire hazards, let engine cool

before lifting / transporting machine or storing

indoors.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SGC-13000N-T in the language / languages: English, German, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley SGC-13000N-T Manual

Product: