Manual Stanley SGC-11000N-T (page 7 of 92) (English, German, Danish, Polish, Swedish, Norwegian, Finnish)

720565

Zoom out

Zoom in

1/92

CONTENTS SUPPLIED

The plate compactor comes partially assembled

and is shipped in carefully packed carton. After

all the parts have been removed from the carton,

you should have:

Basic Models

1. Plate Compactor Chassis with Engine and

Transmission

2. Handle

3. Paving Pad

4. Foldings Wheels Bracket

5. Wheels

engine, disconnect the spark plug, thoroughly

inspect the machine for any damage, and

repair the damage before restarting and

operating the machine.

Do not overload the machine capacity by

compacting too deep in a single pass or at too

fast a rate.

Never operate the unit at high transport

speeds on hard or slippery surfaces.

Exercise extreme caution when operating on

or crossing gravel drives, walks, or roads. Stay

alert for hidden hazards or traffic. Do not carry

passengers.

Never leave the operating position and leave the

plate compactor unattended when the engine is

running.

Always stop the engine when compacting is

delayed or when walking from one location to

another.

Stay away from the edged of ditches and avoid

actions that may cause the plate compactor to

topple over.

Always ascend slopes carefully, in a direct path

and in reverse to present the plate compactor from

toppling over onto the operator.

Always park the unit on a firm and level surface

and shut the tool off.

To reduce exposure to vibration, limit the

hours of operation and take periodic breaks

to minimize repetition and rest your hand.

Reduce the speed and force in which you do

the repetitive movement. Try to fill each day

with jobs where operating hand-held power

equipment is not required.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SGC-11000N-T in the language / languages: English, German, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley SGC-11000N-T Manual

Product: