Manual Stanley SGC-11000N-T (page 5 of 92) (English, German, Danish, Polish, Swedish, Norwegian, Finnish)

720565

Zoom out

Zoom in

1/92

Never operate the machine when it is in need

of repair or is in poor mechanical condition.

Replace damaged, missing or failed parts

before using it. Check for fuel leaks. Keep the

machine in safe working condition Do not use the

machine if the engine’s switch does not turn it on

or off. Any gasoline powered machine that can not

be controlled with the engine switch is dangerous

and must be replaced.

Form a habit of checking to see that keys

and adjusting wrenches are removed from

machine area before starting it. A wrench or

a key that is left attached to a rotating part of

the machine may result in personal injury.

Stay alert, watch what you are doing and use

common sense when operating the machine.

Do not overreach. Do not operate the machine

while barefoot or when wearing sandals or

similar lightweight footwear. Wear protective

footwear that will protect your feet and

improve your footing on slippery surfaces.

Keep proper footing and balance at all times.

This enables better control of the machine in

unexpected situations.

Avoid accidental starting. Be sure the engine’s

switch is off before transporting the machine

or performing any maintenance or service on the

unit. Transporting or performing maintenance or

service on a machine with its switch on invites

accidents.

Fuel safety

Fuel is highly flammable, and its vapors can

explode if ignited. Take precautions when using

to reduce the chance of serious personal injury.

When refilling or draining the fuel tank, use an

approved fuel storage container while in a clean,

well-ventilated outdoor area. Do not smoke,

or allow sparks, open flames or other sources

of ignition near the area while adding fuel or

operating the unit. Never fill fuel tank indoors.

Keep grounded conductive objects, such as tools,

away from exposed, live electrical parts and

connections to avoid sparking or arcing. These

events could ignite fumes or vapors. Always stop

the engine and allow it to cool before filling the fuel

tank. Never remove the cap of the fuel tank or add

fuel while the engine is running or when the engine

is hot. Do not operate the machine with known

leaks in the fuel system.

Loose the fuel tank cap slowly to relieve any

pressure in the tank.

Never overfill fuel tank (there should be no

fuel above the upper limit mark).

Replace all fuel tank and container caps

securely and wipe up spilled fuel. Never

operate the unit without the fuel cap securely

in place.

Replace all fuel tank and container caps

securely and wipe up spilled fuel. Never

operate the unit without the fuel cap securely

in place.

Avoid creating a source of ignition for spilled

fuel. If fuel is spilled, do not attempt to start

the engine but move the machine away

from the area of spillage and avoid creating

any source of ignition until fuel vapors have

dissipated.

Store fuel in containers specifically designed

and approved for this purpose.

Store fuel in a cool, well-ventilated area,

safely away from sparks, open flames or other

sources of ignition.

Never store fuel or machine with fuel in the

tank inside a building where fumes may reach

an spark, open flame, or any other source

of ignition, such as a water heater, furnace,

clothes dryer and the like. Allow the engine to

cool before storing in any enclosure.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SGC-11000N-T in the language / languages: English, German, Danish, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stanley SGC-11000N-T Manual

Product: