722516
6
Zoom out
Zoom in
Previous page
1/76
Next page
6
ENGLISH (Original instructions)
Warning! Do not charge the battery at ambient temperatures
below 10 °C or above 40 °C. Recommended charging
temperature: approx. 24 °C.
Note: The charger will not charge a battery if the cell
temperature is below approximately 10 °C or above 40 °C.
The battery should be left in the charger and the
charger will begin to charge automatically when the cell
temperature warms up or cools down.
Note: To ensure maximum performance and life of lithium-ion
battery packs, charge the battery pack fully before rst use.
u Plug the charger (14) into an appropriate outlet before
inserting battery pack (13).
u The green charging light (14a) will blink continuously
indicating that the charging process has started.
u The completion of charge will be indicated by the green
charging light (14a) remaining ON continuously. The
battery pack (13) is fully charged and may be removed
and used at this time or left in the charger (14).
u Charge discharged batteries within 1 week. Battery life will
be greatly diminished if stored in a discharged state.
Charger LED Modes
Charging:
Green LED Intermittent
Fully Charged:
Green LED Solid
Hot/Cold Pack Delay:
Green LED Intermittent
Red LED Solid
Note: The compatible charger(s) will not charge a faulty
battery pack. The charger will indicate a faulty battery pack by
refusing to light.
Note: This could also mean a problem with a charger. If the
charger indicates a problem, take the charger and battery
pack to be tested at an authorized service centre.
Leaving the battery in the charger
The charger and battery pack can be left connected with the
LED glowing indenitely. The charger will keep the battery
pack fresh and fully charged.
Hot/Cold Pack Delay
When the charger detects a battery that is too hot or too cold,
it automatically starts a Hot/Cold Pack Delay, the green LED
(14a) will ash intermittently, while the red LED (14b) will
remain on continuously, suspending charging until the battery
has reached an appropriate temperature.
The charger then automatically switches to the pack charging
mode. This feature ensures maximum battery life.
Battery state of charge indicator (Fig. B)
The battery includes a state of charge indicator to quickly
determine the extent of battery life as shown in gure B. By
pressing the state of charge button (13a) you can easily view
the charge remaining in the battery as illustrated in gure B.
Installing and Removing the Battery Pack (not
supplied) from the tool
To install battery pack (not supplied) (Fig. C)
u Insert battery pack rmly into tool until an audible click is
heard as shown in gure C. Ensure battery pack is fully
seated and fully latched into position.
To remove battery pack (not supplied) (Fig. C)
u Depress the battery release button (13b) as shown in
gure C and pull battery pack out of tool.
Attaching vacuum hose (Fig. D)
The vacuum hose (8) will need to be attached to the
vacuum before using the appliance.
u Place the vacuum on a at, rm surface.
u Unlatch tank latches (5) and remove power head from
the tank. Remove the hose (8) from the tank.
u Align the hose end (15) with the intake port (17) on the
front of the appliance, ensuring the hose alignment lock
(16) is aligned with the arrow (17) on the intake port.
u Insert the hose end into the intake port and twist
clockwise to lock in place.
u Replace power head onto the tank and secure latches.
Note: The power head will only t onto the tank when the
intake port on the front of the power head and the storage
area for the wide nozzle tool on the tank are aligned as
shown in gure D.
Correct hand position
Warning! To reduce the risk of serious personal injury,
ALWAYS hold securely in anticipation of a sudden reaction.
u Proper hand position requires one hand on the main
handle (2).
Use
On / Off Switch (Fig. E)
u Attach the appropriate accessory to the hose (8).
u Insert battery pack (not supplied).
u To turn vacuum on, press the I/O (on/off) button (1).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SFMCV002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SFMCV002 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info