720477

Stanley SFMCCS630 Manual

19
Zoom out
Zoom in
Previous page
1/196
Next page
17
ENGLISH
• Li-Ion cells are recyclable. Take them to your dealer or a
local recycling station. The collected battery packs will be
recycled or disposed ofproperly.
Guarantee
1 Year Guarantee
All STANLEY FATMAX power tool products include a 1 year
guarantee as standard. In the unlikely event that your powertool
becomes defective due to faulty materials or worksmanship
within 1 year of purchase, STANLEY guarantees to replace or
repair all defective parts free of charge, or – at our discretion –
replace the item free ofcharge.
3 Year Guarantee
Register your STANLEY FATMAX power tool within 4 weeks
of purchase and qualify for an additional 2 year guarantee.
Having registered your power tool, in the unlikely event that
your powertool becomes defective due to faulty materials or
worksmanship, STANLEY guarantees to replace or repair all
defective parts free of charge, or – at our discretion – replace the
item free ofcharge.
TROUBLESHOOTING
Problem Solution
Unit will notstart. • Check batteryinstallation.
• Check battery
chargingrequirements.
• Check that lock off is fully pushed
down prior to moving maintrigger.
Unit shuts down
inuse.
• Chargebattery.
• Unit is being forced. Restart and
apply lesspressure.
Battery
won’tcharge.
• Insert battery into charger until red
charging light illuminates. Charge up
to 8 hours if battery is totallydrained.
• Plug charger into a working outlet.
Refer to Important Charging Notes
for moredetails.
• Check current at receptacle by
plugging anappliance.
• Check to see if receptacle is
connected to a light switch which
turns power off when you turn out
thelights.
• Move charger and appliance to
a surrounding air temperature of
above 4.5°C or below 40.5°C.
Bar /
Chainoverheated.
• Refer to
Adjusting Chain
Tension
section.
• Refer to
Chain Oiling
section.
Chain isloose. • Refer to Adjusting Chain
Tensionsection.
Problem Solution
Poor cutquality.
• Refer to
Adjusting Chain
Tension
section.
NOTE:
Excessive
tension leads to excessive wear and
reduction in life of bar and chain.
Lubricate before each cut. Refer to
Replacing the Saw Chain
section.
Unit runs but does
notcut.
• Chain could be installed backwards.
Refer to sections for installing and
removingchain.
Unit does notoil. • Refill oilreservoir.
• Clean guide bar, sprocket and
sprocket cover. Refer to Care And
Maintenancesection.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SFMCCS630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SFMCCS630 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 23,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info