720476
11
Zoom out
Zoom in
Previous page
1/158
Next page
11
Whilst working always keep the machine an
adequate distance from your body.
Always switch o the machine during breaks and
when changing location. Wait until the chainsaw
stops and switch o the engine.
Never leave the machine unattended at the
workplace. Store the machine in a safe place
during breaks.
Always switch o the machine when changing
location.
Personnel using the machine must not be
distracted. This may cause them to lose control of
the machine.
Never use the machine in rain, in wet or damp
environments and do not store it outdoors.
If the machine becomes wet, wait until it is fully
dry before using it again.
Protect the machine from rain and moisture.
Always hold the saw with two hands when the
engine is running.
Use the claw to position the saw for every cut and
always start every cut with the chain moving.
Complete the cut in such a way that the saw does
not become trapped in the wood.
Pay special attention to branches that are under
tension.
Only pull the machine out of the wood whilst the
chain is still moving.
Never saw using one hand over shoulder height.
Always stand perpendicular to the slope when
using the saw on a gradient.
Always stand to the side of falling trees.
Watch the falling direction of the sawn parts.
Never start a cut using the tip of the bar and never saw
using the tip of the bar – danger of recoil!
There is always a risk of recoil if the tip of the bar
touches wood or other objects. This makes the
chainsaw impossible to control and may lead to
it being catapulted with great force towards the
operator.
Always saw through one branch at a time.
Watch neighbouring branches when lopping
branches o a tree.
Never use the machine as a lever for moving
objects.
Always use the chain guard for transporting the
chainsaw.
Before use
Check the machine and chain to ensure that they
are in perfect working order and safe to use.
Check the function of the chain lubrication system and
the oil level. Check the chain tension and the function of
the chain brake.
Machine components (B1-B2)
1. Guide bar
2. Saw chain
3. Chain guard
4. Chain brake / Hand guard
5. Claw stop
6. Sprocket wheel cover
7. Guide bar bolts/screws
8. Chain adjustment screw
9. Front handle
10. Rear handle
11. Starter cable
12. Oil tank cover
13. Petrol tank cover
14. Safety trip
15. Spark plug wrench
16. Air lter cover
17. Choke lever
18. Control switch
19. Throttle lever
20. Oil discharge duct
21. Fuel mixing canister
G
B
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SCS-52 JET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SCS-52 JET in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese as an attachment in your email.

The manual is 6,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info