720475

Stanley SCS-46 JET Manual

14
Zoom out
Zoom in
Previous page
1/126
Next page
14
Stop the engine (B19)
- Allow the engine to slow down to idling speed
without any throttle.
- Move the control switch (18) downwards to
“STOP”.
Start when the engine is warm
- The procedure is identical for starting when the
engine is cold. However, in this case the choke
lever (17) remains fully pushed in.
Working with the chainsaw
Wear gloves, ear protectors, protective clothing
and a helmet with a visor.
Never saw above shoulder height.
Never saw with one hand.
Never saw on a ladder, in a tree or if you are not
standing on firm footing.
Check the following before starting the engine:
- Is the saw chain tension correct ?
- Is the oil tank full?
- is the chain brake released?
- Start the chainsaw.
Holding the saw (B20)
Hold the front handle (9) in your left hand and the
rear handle (10) in your right hand.
Switch off the saw
Release the throttle lever (19).
Set the control switch (18) to <<STOP>>). Do not
put down the chainsaw until the chain has stopped
moving.
Carburettor adjustment
The carburettor has been set at the factory to
provide the best possible performance. If you
guard towards your body. The chain will start
when the saw is switched on.
Machine instructions
Check the chainsaw at regular intervals for signs
of damage.
Ensure that all the parts work correctly and properly.
Please note that all parts must be fitted correctly
in order to function properly.
Have damaged parts repaired immediately in an
after-sales workshop.
Start when the engine is cold (B17-B19)
- Place the petrol chainsaw safely on the ground.
- Move the control switch (18) upwards.
-Gently press primer button (23) often enough that no
more bubbles are visible (approx. 5-6 times).
- Pull the choke lever (17) out as far as possible.
- Adopt a safe posture.
- Hold the petrol chainsaw securely on the ground
using your left hand.
- Place your right foot in the shaft of the rear
handle (10).
- Pull the starter cable (11) out as far as possible 3
to 5 times.
- Choke level jumps back automatically when pressing
the trigger.
- Pull the starter cable (11) several times quickly
and forcefully right to the end of the cable until
the engine starts.
Warm up the engine for 30 seconds. Tighten and release
the trigger.
G
B
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stanley SCS-46 JET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stanley SCS-46 JET in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 3,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info