603458
23
Zoom out
Zoom in
Previous page
1/60
Next page
GX1255S
6.2 SENDING A DISTRESS CALL
The distress call automatically includes the vessel’s DSC MMSI and Lat/
Lon position. Refer to section 7.9 (USER MMSI INPUT). The vessel’s posi-
tion can be sent only if the transceiver is properly connected to an operating
GPS receiver.
1. Lift the red spring loaded DISTRESS cover and press
the DISTRESS key. The “DISTRESS” icon will appear
on the LCD.
2. Press and hold the DISTRESS key. The LCD will count
down (3, 2, 1) following this the QUEST will transmit the Distress Call.
3. When the distress signal is sent, “TX” icon will appear
on the LCD. After the message has been sent, the Dis-
tress Alarm will sound.
4. The transceiver “shadow-watches” for a transmission
between CH16 and CH70 until an acknowledgment sig-
nal is received. “RECEIVED ACK” will scroll on the LCD.
5. If no acknowledgment is received, the distress call is
repeated in 3.5 to 4.5 minute intervals until an acknowl-
edgment is received.
6. To cancel a Distress Call
1) Press the 16/9 key
2) Press the WX key
3) Turn off the radio
4) Press the DISTRESS key, then press the UP or
DOWN key until “CANCEL” is shown on the LCD.
Press the CALL/SET key.
7. When a distress acknowledgment is received, a distress
alarm sounds and channel 16 is automatically selected.
8. To cancel the alarm, press any key.
NOTE
When a GPS receiver with NMEA output is connected, the vessel’s po-
sition is automatically transmitted with the distress call.
Page 21
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon Quest GX1255S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Quest GX1255S in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info