Manual Standard Horizon Quest GX1255S (page 21 of 60) (English)

603458

Zoom out

Zoom in

1/60

GX1255S

5.10 POSITION INDICATION

The transceiver has the ability to display the vessel’s position (LAT/LON) for

Confirmation of the data, if connected to a GPS receiver.

1. Press and hold the H/L key, displays

“LAT” and “LON” information alternately

every two seconds.

If the GPS receiver receives no signal,

the display will be as shown in the illus-

tration.

2. To hide the position information, press and hold the H/L

key again.

5.11 TIME INDICATION

When press and hold the 16/9 and H/L keys while turn the

transceiver on, the transceiver will display the TIME on the

upper side, if connected to a GPS receiver.

NOTE

The TIME OFFSET should be set to local time in the DSC/RADIO setup

mode when the radio is connected the GPS navigation receiver. To ad-

just TIME OFFSET to your local time, refer to section 7.6 TIME OFF-

SET.

5.12 RESETTING THE TRANSCEIVER’S MICROPROCESSOR

Resetting the microprocessor restores the initial, factory supplied conditions

in the transceiver. These are called the default conditions.

To reset the microprocessor, first turn the transceiver off. Then while press-

ing the WX and SCAN keys, turn the transceiver on. The default conditions

are:

• No channels in SCAN memory.

• Channel 16 will be selected when the transceiver is turned on.

• WX channel 01 will be recalled when the WX key is pressed.

• Key beep will be on.

NOTE

Resetting the microprocessor will not erase DSC MMSI and Directory

information.

(Latitude) (Longitude)

(No GPS Signal)

Page 19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Quest GX1255S in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Standard Horizon Quest GX1255S Manual

Product: