603460

Standard Horizon INTREPID - GX1270S Manual

23
Zoom out
Zoom in
Previous page
1/70
Next page
GX1270S Owner’s Manual page 20
6.2 SENDING A DISTRESS CALL
The distress call automatically includes the vessel’s DSC MMSI and Lat/
Lon position. Refer to section 7.12, USER MMSI INPUT. The vessel’s
position can be sent only if the transceiver is properly connected to an
operating GPS receiver.
6.2.1 Sending a Distress Call Automatically
1. Lift the red spring loaded DISTRESS cover and
press the DISTRESS key. The distress menu
will appear on the LCD.
NOTE
If GPS is connected skips 2 and 3 steps and go directry to step 4.
2. Press the DISTRESS or CALL/SET key until
the distress sending menu appear.
When a GPS is connected and INVALID is not
displayed, LCD will shows step4.
3. Press the UP or DOWN key to select SEND.
When you select MANUAL, refer to 6.2.2
Sending a Distress Call Manually.
4. Press and hold the DISTRESS or CALL/SET
key for 3 seconds or more. Holding time will
appear on the LCD.
5. When the distress signal is sent, the dot-matrix
area of the LCD will be as shown in the
illustration on the left.
After the message has been sent, the Distress
Alarm will sound.
6. The transceiver “shadow-watches” for a
transmission between CH16 and CH70 until an
acknowledgment signal is received. “DISTRESS”
and “WAITING” will appear on the LCD.
7. If no acknowledgment is received, the distress call is repeated in 4
minute intervals until an acknowledgment is received.
DISTRESS
WAITING
>DISTRESS
EXIT
A
DISTRESS
>SEND
MANUAL
EXIT
A
PRESS AND
HOLD 3 SECOND
FOR TRANSMIT
A
TX HI USA
(When No GPS is connected
or INVALID is displayed, LCD
shows below figure.)
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon INTREPID - GX1270S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon INTREPID - GX1270S in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info