603460
21
Zoom out
Zoom in
Previous page
1/70
Next page
GX1270S Owners Manual page 18
5.11 VOICE SCRAMBLER
If privacy of communications is desired, a CVS2500 voice scrambler (VS)
can be installed in the transceiver. Contact your Dealer to have a CVS2500
installed. Refer to the section 7.6 of DSC/RADIO SET UP mode to program
the voice scrambler.
5.11.1 Operation with voice scrambler
1. Turn on the transceiver.
2. Select a channel that was programmed for
scrambler mode. (Example: the voice scrambler
code is set 3.)
If a channel is not set for the voice scrambler,
the display will as shown in the illustration on the
left.
If a voice scrambler is canceled temporarily in
the SETUP menu, the display will be as shown
in the illustration on the left.
3. Monitor the channel before transmitting.
4. Transmit the voice message. The signal sent will be scrambled.
5.12 RESETTING THE TRANSCEIVERS MICROPROCESSOR
Resetting the microprocessor restores the initial, factory supplied
conditions in the transceiver. These are called the default conditions.
To reset the microprocessor, first turn the transceiver off. Then while
pressing the WX and SCAN keys, turn the transceiver on. The default
conditions are:
No channels in SCAN memory.
Channel 16 will be selected when the transceiver is turned on.
WX channel 01 will be recalled when the WX key is pressed.
Key beep will be on.
NOTE
Resetting the microprocessor will not erase DSC MMSI and Directory
Call Waiting information.
HI USA
VS 3
A
HI USA
VS OFF
A
HI USA
A
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon INTREPID - GX1270S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon INTREPID - GX1270S in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info