Manual Standard Horizon HX500E (page 16 of 36) (English)

603514

Zoom out

Zoom in

1/36

HX500EPage 14

6. ADVANCED OPERATION ON THE MARINE BAND

6.1 USA, CANADIAN, AND INTERNATIONAL CHANNELS

1. To change from US to Canadian or International Marine Channels, hold

down the [16/9] key and press the [DW] key. The band will change from

USA, to International, and to Canadian with each press.

2. “USA” appears on the LCD for the USA band,

“INTL” appears for the International band, and

“CAN” appears for the Canadian band.

3. Refer to the marine channel charts in section

11 “VHF MARINE CHANNEL ASSIGNMENTS” for allocated channels.

6.2 MEMORY SCAN

The HX500E can be programmed to scan channels from a minimum of 2

channels up to all channels in the marine band. If an incoming signal is

detected on one of the channels during scan, the radio will pause on that

channel, allowing you to listen to the incoming transmission.

1. Press the SQL switch then the [S] or [T] key until the background noise

from the speaker is turned off.

2. Select the desired channel to be included in the

scan memory using the [S] or [T] key.

3. Press the [MEM] key to store the channel into the

transceiver’s scan memory. “MEM” will be dis-

played on the LCD.

4. Repeat steps 1 and 2 for all the channels to be scanned.

5. To delete a channel from the transceiver’s scan memory select the memo-

rized channel. Press the [MEM] key, “MEM” indicatin will be removed

from the display.

6. To start scanning, press the [SCAN] key. The scan proceeds from the

lowest to the highest programmed channel and stops scanning when a

transmission is received. Scanning will resume when the incoming signal

disappears at the end of the transmission. A small “SCAN” icon is shown

on the display during scanning.

7. To stop the scan, press the [SCAN] key.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon HX500E in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Standard Horizon HX500E Manual

Product: