603514

Standard Horizon HX500E Manual

15
Zoom out
Zoom in
Previous page
1/36
Next page
HX500E Page 13
5.4 PRESET CHANNELS (0 ~ 9): INSTANT ACCESS
Ten user-assigned channels can be programmed for instant access.
Programming
1. Hold down the [PRESET] key, and press the [S] or [T] key (repeatedly,
if necessary) until the desired channel number is displayed.
2. With the desired number displayed, release the [PRESET] key.
3. Repeat steps 2 and 3 to program the desired channels into Preset Chan-
nels “0” ~ “9.”
4. To delete a Preset Channel, hold down the [PRESET] key and press the
[S] or [T] key until the Preset Channel number to be deleted is dis-
played, then release the [PRESET] key.
Operation
Pressing the [PRESET] key will toggle between Preset Channels “0” - “9”
and the last selected “regular” channel. Preset Channel “0” is represented
by “0” to the right of the channel number on the LCD
for 1 second, and preset channel “1” is represented
by “1” and so forth. The preset channel number will
disappear after a few seconds.
Note:You may add an alphanumeric name “Tag” to any desired Preset Chan-
nel; refer to CH NAME SET item on the section 8 “MENU (“SET”) MODE.”
5.5 ENABLING S.O.S. STROBE OPERATION
The S.O.S. STROBE feature utilizes the high-intensity strobe LED on the
front of the HX500E as a visual distress beacon. When enabled, the LED
blinks the internationally recognized Morse Code “S.O.S.” message
(
•••
–––
•••
)
at a rate of 5 words per minute. This can be very useful in
summoning help from rescuers who may not be able to communicate with
you via radio.
1. Hold down the [MEM] key while turning the radio on to activate the emer-
gency S.O.S. Strobe. Once the radio comes on, the BUSY/TX LED will
flash the Morse Code S.O.S. message repeatedly.
2. The S.O.S. strobe function is interrupted when a signal is received or if
the squelch control is turned so audio is heard from the speaker. and
during transmission.
3. To disable the S.O.S. strobe function, turn the radio off and back on again.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon HX500E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon HX500E in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info