603455

Standard Horizon Eclipse DSC - GX1100S Manual

45
Zoom out
Zoom in
Previous page
1/76
Next page
Page 45GX1100S
5. Press the
[
ENT
]
key, then press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to select the operating
channel you want to communicate on and
press the
[
ENT
]
key.
6. Press the
[
ENT
]
key again to transmit the
Group Call signal.
7. After the GROUP CALL is transmitted, all
the radios in the group will switch to the
channel which is selected on step 5 above
(but, the display will not change).
8. Press the
[
CLR
(
WX
)]
key to return to radio
operation mode.
9. Listen to the channel to make sure it is not
busy, then key the microphone and call the
other vessels you desire to communicate with.
Manual Calling
You may enter an MMSI number manually to contact without the Setting up the
Group call number.
1. Press the
[
CALL
(
MENU
)]
key. The “
DSCDSC
DSCDSC
DSC
MENUMENU
MENUMENU
MENU” will appear.
2. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to se-
lect “
GROUPGROUP
GROUPGROUP
GROUP”. (To cancel, press the
[
16/9
]
key or
[
CLR
(
WX
)]
key.)
3. Press the
[
ENT
]
key. The transceiver will
beep, and the “
Group DirectoryGroup Directory
Group DirectoryGroup Directory
Group Directory” will appear.
4. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to
select “
MANUALMANUAL
MANUALMANUAL
MANUAL”, then press the
[
ENT
]
key.
5. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to scroll
through numbers, 0-9. To enter the desired num-
ber and move one space to the right press the
[
ENT
]
key. Repeat this procedure until all nine
space of the MMSI number which you want to con-
tact are entered.
6. If a mistake was made entering in the MMSI num-
ber, repeat pressing the microphone’s
[
H/L
]
key
until the wrong nunber is selected, then press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to correct the entry.
7. When finish the entering the MMSI number, press and hold the
[
ENT
]
key.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon Eclipse DSC - GX1100S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Eclipse DSC - GX1100S in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info