603455

Standard Horizon Eclipse DSC - GX1100S Manual

43
Zoom out
Zoom in
Previous page
1/76
Next page
Page 43GX1100S
11.7 GROUP CALL
This feature allows the user to contact a group of specific vessels (example
members of a yacht club) with a Group MMSI number using the Group call
function to automatically switch to a desired channel for voice communications.
This function is very useful for yacht clubs and vessels traveling together that
want to collectively make announcements on a predetermined channel.
11.7.1 Setting up a Group Call
For this function to operate the same Group MMSI must be programmed into
all the DSC VHF radios within the group of vessels that will be using this fea-
ture. To understand about Group MMSI programming, first a Ship MMSI has to
be understood.
Ship MMSI: The first three digits called a MID (Mobile Identity Group) of a Ship
MMSI denote the country the ship registered for a MMSI. The last 6 digits are
specific to the Ships ID.
Ship MMSI Example: If your MMSI is “366123456”, “366” is MID which denote
the country and “123456” is Ships ID for you.
Group MMSI:
Group MMSI numbers are not assigned by the FCC or other organizations
licensed to assign ship MMSI numbers.
The first digit of a Group MMSI is always set to “0” by International rules. All
Standard Horizon radios are preset so when programming a Group MMSI
the first digit is set to “0”.
The USCG recommends programming the MID of a ships MMSI into the
Second, Third and Fourth digits of the Group MMSI as it denotes the area
the ship is located in.
The last 5 digits are decided upon by persons in the Group. This is an
important step as all radios in the Group must contain the same Group
MMSI so they can be contacted by each other. There is a chance that an-
other group of vessels may program in the same Group MMSI. If this hap-
pens, simply change one or more of the last 5 digits of the Group MMSI.
1. Press and hold down the
[
CALL
(
MENU
)]
key until “
SETUP MENUSETUP MENU
SETUP MENUSETUP MENU
SETUP MENU” menu appears.
2. Press the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys to se-
lect “
DSC SETUPDSC SETUP
DSC SETUPDSC SETUP
DSC SETUP” menu.
3. Press the
[
ENT
]
key, then select “
GROUPGROUP
GROUPGROUP
GROUP
DIRDIR
DIRDIR
DIR” with the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys.
4. Press the
[
ENT
]
key, then select “
ADDADD
ADDADD
ADD” with
the
[
S
(
UP
)]
/
[
T
(
DOWN
)]
keys.
5. Press the
[
CALL
(
MENU
)]
key.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Standard Horizon Eclipse DSC - GX1100S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Standard Horizon Eclipse DSC - GX1100S in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info