Manual Stadler Form EVA (page 12 of 96) (English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish)

669364

Zoom out

Zoom in

1/96

fragrance container (20). Add a maximum of 1 – 2 drops of fragrance

into the fragrance container! Push the container back again and press

and release it to lock it. Tip: in order to change the fragrance, remove

the cotton pad and clean the container with soap. Now you may insert

a new cotton pad (commercially available) and add drops of the desired

fragrance.

12. If the water level indicator (16) changes to red, the water must be re-

filled. Remove the water tank (6) and fill it with clean, cold tap water

up to the maximum mark. After replacing the water tank, the appliance

automatically resumes operation after a few seconds. The water tank

can also be refilled during operation.

13. If you find the lamps too bright (in a bedroom, for example), you may

reduce the light intensity by pressing the night mode key (21):

• Normal mode (default mode)

• Dimmed mode (push once)

• Lights-out mode (push twice)

• By pushing the dimmer button once more, you can go back into nor-

mal mode.

If there is no water in the appliance, the red water level symbol (16)

lights up in all modes. The red light cannot be dimmed.

14. If two dots are shown (22) on the display (15), Eva cannot establish a

radio connection to the Remote Sensor

(2). Eva still functions thanks

to a humidity sensor within the appliance. Press any button on the Re-

mote Sensor

(2) to activate it. Make sure that the Remote Sensor

(2) is within a 10 m radius of Eva. Walls, doors and floors between Eva

and the Remote Sensor

(2) can disrupt the radio connection. The Re-

mote Sensor

(2) should be optimally positioned at a distance between

3 – 5 m from Eva and on an elevated surface in the middle of the room

(see «Setup/operation» No. 3). The two dots on the display (22) could

also indicate that the batteries in the Remote Sensor

(2) need replac-

ing (see «Setup/operation» No. 2).

Note: Should you see droplets (or other signs of dampness) on or around

the unit, this condensed water is from the humidifier. This means that the

air can no longer absorb the moisture from the humidifier. Please activate

the auto mode with a desired humidity of 45 %. Water droplets should then

stop forming.

Cleaning

Prior to any maintenance, cleaning and after each use, switch off the appli-

ance and unplug the mains cable (1) from the socket.

Attention: Never submerge the appliance in water (danger of short-circuit).

If pre-heating is turned on (the warm mode LED is on (13)), the water inside

the appliance is heated: the water in the water tray (9) and the heating plate

(17) become hot. Avoid touching the water and the heating plate!

• For external cleaning, rub with a damp cloth and then dry thoroughly.

• Run the cleaning mode at least once per month. The appliance must

be off for at least 15 minutes prior to internal cleaning! Then remove the

water tank (6), the mist chamber (23), the cover (18), the Silver Cube (24)

and the fragrance container (20). Fill a cup with 200 ml of tap water mixed

with descaling agent (mix according to the manufacturer’s instructions).

Pour the liquid carefully into the water tray (9) by holding the cup directly

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Stadler Form EVA in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Stadler Form EVA Manual

Product: