669364

Stadler Form EVA Manual

10
Zoom out
Zoom in
Previous page
1/96
Next page
2. After around one minute the results can be seen on the test strip.
Some of the green fields change colour into pink. The water hardness is shown
by how many boxes turn pink. Example: If three are pink, then the water hard-
ness is >14 °dH.
Number of
pink boxes
Water
hardness
Degree of
hardness
(°dH)
Cartridge will last for
(with 4 liter/day)
Days Liter
0/1 Soft
From 4
°dH
90 days approx. 360 L
2 Moderately
hard
From 7
°dH
45 days approx. 180 L
3 Hard
From 14
°dH
30 days approx. 120 L
4 Very hard
From 21
°dH
15 days approx. 60 L
With a water hardness above 21 °dH, we can no longer recommend the use
of an ultrasonic humidifier. We recommend that you use an evaporative
humidifier to increase the humidity in your house (e.g. an Oskar humidifier
made by Stadler Form: www.stadlerform.com/Oskar).
Note: Do not operate Eva with decalcified water out of a decalcification
system that uses the principle of an ion exchanger (salt is added to the wa-
ter). The salt contained in the water may lead to white dust accumulation
around the appliance. To minimize this risk, you can operate Eva using a mix
of distilled and tap water. The mixing ratio should be 50:50.
Attention: Please do not operate the unit using pure distilled water as the
water level indicator will not work correctly. However, Eva may be operated
from a drinking water filter system (e.g. Brita). Should you be unsure about
the quality or composition of the water in your area, contact the caretaker or
your drinking water provider.
Setting up / operation
1. Put Eva in the desired location on a flat surface. The mist reaches a
height of up to 1.4 m thanks to the high-performance humidification (out-
put level 5, warm mode on). This makes it possible to place Eva directly
on the floor. Connect the power cord (1) to a suitable socket.
2. Take the Remote Sensor
TM
(2), the stand (3) and the two batteries out of
the packaging. Open the battery compartment (4) on the underside of
the Remote Sensor
TM
(2) by turning the lid anticlockwise. Insert the two
batteries into the battery compartment (4), as shown on page 4, and
close the lid again. Now place the Remote Sensor
TM
(2) on the stand (3).
3. On the one hand, the Remote Sensor
TM
(2) is a humidity sensor and
guarantees precise humidification by its external position. On the other
hand, the Remote Sensor
TM
(2) also serves as a remote control. Position
the humidity sensor Remote Sensor
TM
(2) in the centre of the room on a
table or a sideboard with an optimal distance from Eva between 3 – 5 m.
The Remote Sensor
TM
should be positioned centrally in the room so that
the room air can flow past the sensor (5) as freely as possible. If this is
not possible, we recommend positioning the Remote Sensor
TM
with a
minimum distance of 30 cm from the wall and a minimum distance of 2 m
from windows and ventilation openings.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Stadler Form EVA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Stadler Form EVA in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info