742373

SQlab ERGOLUX Manual

46
Zoom out
Zoom in
Previous page
1/96
Next page
SQlab | SPORTS ERGONOMICS | ERGOLUX® SADDLES | EDITION US 2019-02 | Page 22
Material defect liability and warranty
Within the EU, all purchase contracts between private individuals and commercial sellers are subject to statutory warranty. From the date
of purchase, buyers have a year warranty. In the event of a defect or a warranty claim, the SQlab partner from whom you purchased the
product is your contact.
If you would like to use the crash replacement, send us your defective product to the following address:
SQlab GmbH
Crash Replacement
Postweg
D-  Tauirchen
The following specialist dealer guarantee is in addition to the legal material defect liability of your contractor and does not aect them.
. In addition to the statutory liability for defects, SQlab GmbH has extended its purchase to specialist retailers in Germany
Products the manufacturer's warranty from  to  months.
In the event of a defect or a warranty request, your SQlab dealer is the contact person.
The following end customer warranty is in addition to the legal defect liability of your contractor and does not aect them.
. For irreparable damage to your SQlab product caused by a crash, SQlab GmbH oers you
a discount of 50% up to  YEARS FROM THE DATE OF PURCHASE WHEN PURCHASING A NEW SQLAB REPLACEMENT PRODUCT.
Note
Note
This rule applies only in European countries. Check with your SQlab dealer for any
deviating regulations in your country.
Care
Clean the saddle regularly with water and a so cloth. If heavily soiled, a commercially available rinsing or cleaning agent and warm
water can also be used.
Warning
Never use high pressure cleaners, cleaning cloths or sponges with particularly rough or grainy surfaces, solvents or other aggressive
cleaning agents such as acetone, (nitro) thinner, mineral spirits or trichlorethylene for cleaning. This could damage the cover of the
saddle, the saddle shell and the material of the struts.
Note
Note
Noises such as creaking, crackling, squeaking are annoying and the cause is usually dicult to gure out. The most common
cause of noises from the saddle area is the saddle clamping. Make absolutely sure that the clamping surfaces of the seat post
and the clamping area of the seat stays are free from dirt. However, the connection between the seat post and frame to the bot-
tom bracket oen makes a noise. The connection of the struts to the saddle can also cause noise. Lightly spraying oil or creep
oil in the space between saddle stays - saddle shell helps. It is usually the rear linkage that is causing noises. Oiling must be
repeated approximately every  trips at rst. Aer some time, no noise should be produced even without regular lubrication.
To nd out the actual cause of the noise, it is recommended to only oil the front or the rear connection between saddle strut and
saddle shell at rst.
… 46 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SQlab ERGOLUX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SQlab ERGOLUX in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info